Microchip MCP3913 24-Bit, 125kSPS, 6-Ch Simultaneous Sample ADC

Technical Specification

Features:
  • Make: Microchip
  • Model code: MCP3913
  • Type: Energy Meter Analog Front End
  • No. of input: 6
  • Sampling rate: 125 kSPS Max
Additional info:

Six Simultaneous Sampling 24-bit Delta-Sigma ADCs 94.5 dB SINAD, -107 dBc Total Harmonic Distortion (THD) (up to 35th Harmonic), 112 dBFS SFDR for Each Channel Enables 0.1% Typical Active Power Measurement Error over a 10,000:1 Dynamic Range Advanced Security Features: - 16-bit Cyclic Redundancy Check (CRC) checksum - 16-bit CRC checksum and interrupt alert for register map configuration - Register map lock with 8-bit secure key Programmable Data Rate up to 125 ksps Oversampling Ratio up to 4096 Ultra-Low Power Shutdown Mode with < 10 µA -122 dB Crosstalk between Channels Differential Voltage Reference Input Pins High Gain Programmable-Gain Amplifier (PGA) on Each Channel (up to 32 V/V) Phase Delay Compensation with 1 µs Time Resolution Separate Data Ready Pin for Easy Synchronization Individual 24-bit Digital Offset and Gain Error Correction for Each Channel High-Speed 20 MHz Serial Peripheral Interface (SPI) with Mode 0,0 and 1,1 Compatibility Continuous Read/Write Modes for Minimum Communication Time Available in a 28-lead SSOP and 40-lead UQFN Package AEC-Q100 Grade 1

Read more
Make Microchip
Manufacturer Microchip Technology Inc.
Category Transmission and Distribution>Electric Meters & Metering Equipment
Model code MCP3913
Type Energy Meter Analog Front End
No. of input 6
Sampling rate 125 kSPS Max
Additional info
  • Six Simultaneous Sampling 24-bit Delta-Sigma ADCs
  • 94.5 dB SINAD, -107 dBc Total Harmonic Distortion (THD) (up to 35th Harmonic), 112 dBFS SFDR for Each Channel
  • Enables 0.1% Typical Active Power Measurement Error over a 10,000:1 Dynamic Range
  • Advanced Security Features: - 16-bit Cyclic Redundancy Check (CRC) checksum - 16-bit CRC checksum and interrupt alert for register map configuration - Register map lock with 8-bit secure key
  • Programmable Data Rate up to 125 ksps
  • Oversampling Ratio up to 4096
  • Ultra-Low Power Shutdown Mode with < 10 µA
  • -122 dB Crosstalk between Channels
  • Differential Voltage Reference Input Pins
  • High Gain Programmable-Gain Amplifier (PGA) on Each Channel (up to 32 V/V)
  • Phase Delay Compensation with 1 µs Time Resolution
  • Separate Data Ready Pin for Easy Synchronization
  • Individual 24-bit Digital Offset and Gain Error Correction for Each Channel
  • High-Speed 20 MHz Serial Peripheral Interface (SPI) with Mode 0,0 and 1,1 Compatibility
  • Continuous Read/Write Modes for Minimum Communication Time
  • Available in a 28-lead SSOP and 40-lead UQFN Package
  • AEC-Q100 Grade 1
Download PDF version Download PDF version
vfd