Killark D2L-142-ML225 Factory Sealed Series Hazardous Location Power Panelboard

Technical Specification

Features:

Make: Killark
Model code: D2L-142-ML225
Series: D2L Series
Type: Main lugs
Application: Hazardous Location ( indoor and outdoor)

Additional info:

Factory Seal between breaker enclosure and termination box eliminates the need for external sealing Gasketed covers assure NEMA/CSA Type 4, 4X rated protection for hosedown and corrosion Main and branch circuit breaker handles can be padlocked in “on” or “off” position Top or bottom feed panels available Breaker chamber hinged cover with quick release – captivated bolts Termination enclosure has hinged cover with quick release latch for easy opening Termination enclosure supplied without conduit openings for easy field punching of incoming and outgoing entries Line and load side of breakers in breaker chamber are factory wired to terminal blocks in termination enclosure and sealed at the factory Breaker enclosure is drilled and plugged for maximum number of circuits to permit field addition of unused branch spaces

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Killark
Manufacturer	Hubbell Incorporated
Category	Transmission and Distribution>Panelboards
Model code	D2L-142-ML225
Series	D2L Series
Type	Main lugs
Application	Hazardous Location ( indoor and outdoor)
Number of Phases	1
Max. Voltage	120/240 VAC
No. of spaces	42
Max. Current	225 A
Wiring configuration	3 wire
Standards	UL, CSA
Additional info	Factory Seal between breaker enclosure and termination box eliminates the need for external sealing Gasketed covers assure NEMA/CSA Type 4, 4X rated protection for hosedown and corrosion Main and branch circuit breaker handles can be padlocked in “on” or “off” position Top or bottom feed panels available Breaker chamber hinged cover with quick release – captivated bolts Termination enclosure has hinged cover with quick release latch for easy opening Termination enclosure supplied without conduit openings for easy field punching of incoming and outgoing entries Line and load side of breakers in breaker chamber are factory wired to terminal blocks in termination enclosure and sealed at the factory Breaker enclosure is drilled and plugged for maximum number of circuits to permit field addition of unused branch spaces
Download PDF version Download PDF version