Siemens HNF364PVPG Heavy Duty Photovoltaic Disconnect Switch

Technical Specification

Features:
  • Make: Siemens
  • Model code: HNF364PVPG
  • Type: Non-Fusible
  • Rated current: 200 A
  • Rated Voltage: 600 V DC
Additional info:

Positive ground 3 pole 3 wire non-fusible disconnect switch for photovoltaic systems Type 1 enclosure for indoor applications Complies with UL98 requirements and is UL listed in file number E335018 as UL1741 Photovoltaic Disconnect Switches Tested per UL requirements to control three separate 600VDC circuits in a single 3 pole switch Factory installed ground bar supplied as standard Door labeling required by Article 690 of the NEC is supplied as standard Metal handle with large plastic grip features a positive stop in both the ON and OFF positions Two and 3 point mounting provisions are standard Large top, bottom and side gutters facilitate wiring Line and load lugs accept larger conductors than required by UL to allow larger cables to be used when required to minimize voltage drop

Make Siemens
Manufacturer Siemens
Model code HNF364PVPG
Type Non-Fusible
Rated current 200 A
Rated Voltage 600 V DC
Nema type 1
No. of Poles 3
No. of wires 3
Standard UL
Additional info
  • Positive ground 3 pole 3 wire non-fusible disconnect switch for photovoltaic systems
  • Type 1 enclosure for indoor applications
  • Complies with UL98 requirements and is UL listed in file number E335018 as UL1741 Photovoltaic Disconnect Switches
  • Tested per UL requirements to control three separate 600VDC circuits in a single 3 pole switch
  • Factory installed ground bar supplied as standard
  • Door labeling required by Article 690 of the NEC is supplied as standard
  • Metal handle with large plastic grip features a positive stop in both the ON and OFF positions
  • Two and 3 point mounting provisions are standard
  • Large top, bottom and side gutters facilitate wiring
  • Line and load lugs accept larger conductors than required by UL to allow larger cables to be used when required to minimize voltage drop