Remee Wire & Cable, a domestic wire and cable manufacturer, has advanced its commitment to support solar and wind energy projects by offering turnkey cabling solutions, due in part to the addition of new production lines dedicated to manufacturing these renewable energy cables.
Every offering in the Renewables by Remee™ line of cables is UL-listed.
Renewables by Remee™
Renewables by Remee™ are made in the United States, and Remee is one of the few domestic manufacturers to offer stranded copper and aluminum cable with XLPE jackets.
Remee is committed to supporting the recent reshoring trends and governmental efforts to develop the renewable energy industry in the United States. Remee Wire & Cable’s turnkey cabling solutions cover virtually every application in solar and wind fields to interconnect equipment with power and/or data transmission.
Solar Array Cables
These single-conductor PV wires are manufactured for use in solar farms to connect solar panel arrays
Stranded bare copper PV wire, all cables feature cross-linked polyethylene (XLPE) jackets for durability. They are offered in a variety of conductor sizes, ranging from 4/0 to 14 AWG and from 250 kcmil to 1000 kcmil.
Solar array cables are rated at 1kV/2kV or 600V and are UL 4703 listed. In addition, these cables comply with all applicable requirements of UL 44, UL 854, UL 1581, as well as NFPA 70. These single-conductor photovoltaic (PV) wires are manufactured for use in solar farms to connect solar panel arrays or other electrical components to intermediate collection points.
Collection (DC Feeder) Cables
Stranded aluminum conductors (AA-8000 Series Aluminum Alloy) with cross-linked polyethylene (XLPE) jackets for durability. These DC Feeder cables are rated at 1kV/2kV and are offered in a variety of conductor sizes, ranging from 4/0 to 6 AWG and 250 kcmil to 1000 kcmil. The operating temperature range is -40°C to +90°C (90°C wet or dry).
In addition to UL 4703, these cables comply with all applicable requirements of UL 44, UL 854, and IEEE 1202 FT4 (for sizes 1/0 and larger). DC Feeder cables connect intermediary collection points to central control units or solar panels to a combiner box.
Power Equipment Cables
These cables feature stranded bare copper or tinned copper conductors and XLPE jackets
RHH/RHW-2/USE-2 and WTTC-type cables feature stranded conductors to deliver power from wind turbines to collection points. In solar fields, power equipment cable delivers power between intermediate collection points.
RHH/RHW-2/USE-2 cables are 600V rated and offered in sizes ranging from 4/0 to 14 AWG, and 250 kcmil to 1000 kcmil. These cables feature stranded bare copper or tinned copper conductors and XLPE jackets.
UL compliance
RHH-type cables comply with the requirements of UL 44 and UL 854. High-stranded bare copper WTTC-type cables are available in 6 AWG and 10AWG with XLPE insulation and PVC jackets and are rated at 1kV.
They comply with UL 758, UL 2277, AWM 2587, and CSA C22.2 No. 210 and 239.
MV (Medium Voltage) Primary Distribution Cables
They feature tree-retardant cross-linked polyethylene insulation and a cross-linked polyethylene jacket
Both the stranded aluminum and copper MV Series are rated 35kv; they feature tree-retardant cross-linked polyethylene (TR-XLPE) insulation and a cross-linked polyethylene (XLPE) jacket.
Aluminum MV cables are offered in conductor sizes ranging from 1/0 to 4/0 AWG, and from 500 kcmil to 1500 kcmil. Copper MV cables are offered in conductor sizes ranging from 1/0 to 4/0 AWG, and 250 kcmil to 1250 kcmil.
concentric neutral copper conductor
These cables are designed for use in three-phase systems with voltage not exceeding 35kV phase to phase, and conductor temperatures not exceeding 105°C for normal operation. MV cables feature a concentric neutral copper conductor that is applied helically in indented channels over the outer semi-conducting shield.
These cables are UL 1072 listed - MV90/MV105 and comply with all applicable requirements of ICEA S-94-649, AEIC CS8, and CSA 68.10. MV cables carry power from the generator/transformer or collection points to the substation.
DISCHARGE-FREE design concept
Copper MV cables are suitable for direct burial, with a double-helix water-blocking yarn
Remee’s MV cables feature a “DISCHARGE-FREE” design concept. The conductor shield, insulation, and insulation shield are extruded simultaneously over the conductor by using triple-extrusion and dry-curing technology. The insulation shield is designed to be strippable.
Copper MV cables are suitable for direct burial, with a double-helix water-blocking yarn applied to all conductors, and a water-swellable tape applied over the insulation shield.
Substation Cables
Remee manufactures a wide variety of shielded and unshielded instrumentation and control cables for use to interconnect substation equipment.
Refer to Remee’s TEKwire™, Vigilance™, Automation, and other cable families for details, or call Remee.
Fiber Optic Cables
Remee’s 22-Series and 28-Series fiber optic cables meet the applicable requirements of TIA/EIA FOTP
Interference-free all-dielectric fiber optic cables are available in a variety of fiber counts, from 2 through 288. They feature loose tube construction, gel-free AquaLock™, and armoring options.
Remee’s 22-Series and 28-Series fiber optic cables meet the applicable requirements of TIA/EIA FOTP Standard 455, RUS 1755.900, GR-20-CORE, and ANSI/TIA-568-C.3. Fiber In Duct is available upon request.
Solid and Stranded Bare Copper and tinned Copper Ground Wire
Popular items include 2/0, 4/0, 2, 4, and 6 AWG conductor sizes, but Remee offers sizes ranging from 4/0 to 14 AWG, and 250 kcmil to 1000 kcmil.
These ground wires meet the applicable requirements of ASTM B 1, ASTM B 2, ASTM B 3, ASTM B 8, and ASTM B 33.
power collection and distribution
Remee’s experience in manufacturing rugged cables for use in many types of harsh outdoor environments
Renewables by Remee™ have been specifically designed for power collection and distribution in solar and wind power generation systems.
Remee’s experience in manufacturing rugged cables for use in many types of harsh outdoor environments provides assurance of signal integrity, continued performance, and delivery of power.
ISO 9001 certification
All Renewables™ by Remee cable products are UL-listed and manufactured under ISO 9001 certification.
Compounds are handled and loaded in a Class 10000 clean room. An optical pellet analyzer is used by the supplier to perform 100% pellet inspection.