Factory Seal between breaker enclosure and termination box eliminates the need for external sealing Gasketed covers assure NEMA/CSA Type 4, 4X rated protection for hosedown and corrosion Main and branch circuit breaker handles can be padlocked in “on” or “off” position Top or bottom feed panels available Breaker chamber hinged cover with quick release – captivated bolts Termination enclosure has hinged cover with quick release latch for easy opening Termination enclosure supplied without conduit openings for easy field punching of incoming and outgoing entries Line and load side of breakers in breaker chamber are factory wired to terminal blocks in termination enclosure and sealed at the factory Breaker enclosure is drilled and plugged for maximum number of circuits to permit field addition of unused branch spaces
| Make | Killark |
|---|---|
| Manufacturer | Hubbell Incorporated |
| Model code | D2L-142-ML225 |
| Series | D2L Series |
| Type | Main lugs |
| Application | Hazardous Location ( indoor and outdoor) |
| Number of Phases | 1 |
| Max. Voltage | 120/240 VAC |
| No. of spaces | 42 |
| Max. Current | 225 A |
| Wiring configuration | 3 wire |
| Standards | UL, CSA |
| Additional info |
|