Eaton EDSC32100 Explosionproof Factory Sealed Motor Starter

Technical Specification

Features:
  • Make: Eaton
  • Model code: EDSC32100
  • Nema type: NEMA/EEMAC 3, 7B*CD, 9EFG
  • Construction: Bodies – Feraloy iron alloy (U.S.) , Shafts and bushings – stainless steel , Sealing enclosures – copper-free aluminum
  • Standard: UL standard: UL1203 / CSA standard: C22.2 No. 30 / Class I, Divisions 1 & 2, Groups B*, C, D / Class II, Division 1, Groups E, F, G / Class II, Division 2, Groups F, G / Class III
Additional info:

Factory sealed devices eliminate external seals, reduce installation problems, lower installation costs and improve safety Mounting lugs and taper tapped hubs with integral bushings Large machine screws for fastening covers to bodies Lockout hole for padlock having 1/4" hasp is provided Close tolerances in machining of wide, mating flanges and journalled shafts and bearings produce flametightness of enclosure joints Dead end (EDS) or through feed (EDSC) hubs – 3/4" or 1" sizes

Make Eaton
Manufacturer Eaton
Model code EDSC32100
Nema type NEMA/EEMAC 3, 7B*CD, 9EFG
Construction Bodies – Feraloy iron alloy (U.S.) , Shafts and bushings – stainless steel , Sealing enclosures – copper-free aluminum
Standard UL standard: UL1203 / CSA standard: C22.2 No. 30 / Class I, Divisions 1 & 2, Groups B*, C, D / Class II, Division 1, Groups E, F, G / Class II, Division 2, Groups F, G / Class III
Additional info
  • Factory sealed devices eliminate external seals, reduce installation problems, lower installation costs and improve safety
  • Mounting lugs and taper tapped hubs with integral bushings
  • Large machine screws for fastening covers to bodies
  • Lockout hole for padlock having 1/4" hasp is provided
  • Close tolerances in machining of wide, mating flanges and journalled shafts and bearings produce flametightness of enclosure joints
  • Dead end (EDS) or through feed (EDSC) hubs – 3/4" or 1" sizes