Board-mount 5W AC/DC for harsh environments introduced by RECOM. The RAC05-K/PD3/H from RECOM is a board-mounted 5W Class II AC/DC converter series, intended for ‘fixed installations’ where higher levels of transients according to over-voltage category III are experienced, along with increased environmental pollution levels. The converters are available with 5V, 12V, or 15V single outputs and include enhanced clearances to meet OVCIII up to 5000m altitude. Nominal input ratings...

Recently, NR successfully won the bid for Mongolia's first photovoltaic (PV) energy storage microgrid project, providing a containerized energy storage PCS solution to help Mongolia expand the application of renewable energy. In Mongolia, the power supply mainly depends on coal-fired power generation and electricity import. Mongolia is gradually expanding the application of clean energy power generation to gradually reduce electricity import and greenhouse gas emissions. advanced energy storag...

The long-established family-owned Portlandzementwerk Wittekind Hugo Miebach Söhne KG from Erwitte in southern Westphalia has signed a contract for six energy efficiency modules from Munich-based waste heat specialist Orcan Energy. With the plant modernization, the cement plant intends to generate additional electricity and significantly improve its eco-balance through sustainable energy generation. Reduced CO2 emissions EP 150.200 efficiency Packs lead to savings on the existing cooler...

Industry 4.0 continues to gather steam as organizations look for ways to increase efficiencies and reduce costs. As companies clamor to digitize every aspect of their organization, they are rapidly adopting automation and intelligent technologies to accelerate the pace of digital transformation. However, when it comes to some asset-intensive industries, such as power generation, water & wastewater, chemicals, and mining, it’s cost-prohibitive and simply not realistic to try and immedi...

When talking about the transition of global energy markets towards a more sustainable and decarbonized value chain, sector coupling has become the new buzzword. In general, it refers to the intertwining of traditionally separated energy sectors.  But the term has also been increasingly adopted as a synonym for the continuing electrification of fossil-fuel-reliant energy market segments. While this is clearly a prerequisite for achieving a carbon-neutral power supply, the challenges must st...

Ultra-violet (UV) radiation is an effective non-contact disinfection method, killing microbes, bacteria, and viruses, including COVID-19, on most surfaces, in water, and in the air. The short wavelength, high energy photons disrupt the RNA/DNA in the cellular structure of microbes and also create free radicals which damage the genomes of viruses, introducing defects that rapidly kill the pathogen.  It is this disrupting and oxidizing effect that makes UV disinfection so effective and usefu...

The shipping industry is struggling with high seas: shipping companies are faced with the challenge of efficiently combining environmental protection and economic efficiency. To bring the two together, marine contractor - Van Oord has chosen to install efficiency PACKs, an organic Rankine cycle (ORC) from cleantech company Orcan Energy on two of its new hybrid water injection dredgers. The launch ceremony of the vessels took place in Rotterdam at the end of June. energy efficiency Among other...

The energy industry is in a period of drastic change. To become climate neutral by 2050, the energy sector must undergo a massive shift by switching to more sustainable renewable energy sources and furthering electrification.  On top of the need to decarbonize, the industry is also becoming increasingly decentralized as a greater number of diverse energy sources interact, bi-directional power flows become standard and renewable energy is generated closer to where it is used. energy-consum...

As the EU Commission prepares to present its ‘Fit for 55’ legislative package, the European CEO Alliance has issued policy recommendations supporting a progressive and ambitious push to achieve climate neutrality. Tackling climate change requires strong collaboration between the public sector and industry, the Alliance announced after its meeting in Paris. The Alliance would welcome a review of the EU’s major regulatory instruments, in particular subsidies for technologies wit...

NR Electric has won the bid for Japan's energy storage application project again, providing containerized BESS PCS solution to help the zero carbon city construction of Gifu ENA City, Japan. ENA Electric Power Company is gradually employing renewable energy and battery energy storage system (BESS) to achieve zero carbon city construction. Integrated PCS solution The containerized energy storage PCS solution has a variety of automatic control operation modes The integrated PCS solution provid...

The buck converter has been in use for a century and is an indispensable part of the current electronic circuits. This article describes how a crude electromechanical component has evolved into a miniature assembly that can process hundreds of watts of power. buck converter The buck converter converts an input voltage to a lower output voltage. Its basic elements are shown in Figure 1. Initially, the switch SW1 is closed; that is, current flows into the coil L1. Since the coil is a differ...

Gephart will once again be working alongside longtime partner RJM Construction for the renovation of the 1010 Strutwear Building in Minneapolis, Minnesota. Originally known as the Strutwear Knitting Company Building, this former hosiery factory which is listed in the National Register of Historic Places, will be repurposed into a new apartment building. In total, the 10-story, 261,457 SF building will have 172 apartments, office space, and retail space. The adjacent parking ramp and building co...

A trend-setting project on climate protection has now been launched by three traditional companies along the Rhine and Ruhr, in Germany. It is planned to supply industrial waste heat from thyssenkrupp Steel to the König brewery through a new steam transfer line managed by E.ON, in order to provide the thermal energy required for the brewery processes. E.ON signs long-term cooperation agreement For this purpose, waste heat steam from steel production at thyssenkrupp Steel’s Ruhrort...

RECOM has launched an eighth-brick DC/DC converter series with 9-60 VDC input and optional 12, 24, or 48 V outputs rated at 150 W. The RPA150E series has an industry-standard pin-out with outputs trimmable over a wide ±20% range to include 28 V for avionic systems and 57 V for PoE applications. The 6:1 input range covers nominal 12, 24, and 48 V system rails with sufficient margin to include 48 V battery charging voltage and 12 V battery cranking voltage dips. High efficiency of the RPA...

Supporting E.ON’s digital ambitions, Sebastian Weber and Christopher d’Arcy will become Managing Directors of E.ON Digital Technology GmbH as of July 1, 2021 and will report directly to Victoria Ossadnik, E.ON SE Board Member for Digital. Sebastian Weber will act as group-wide CTO for E.ON, overseeing the expansion of digital platforms and IT operations. Christopher d’Arcy will be responsible as Senior Vice President for Digital & Technology Expert Services with accountabi...

On June 7, 2021, the generator terminal sub-synchronous damping control (GTSDC) system of Datang Xilinhaote (Xilinhot) power plant completed the oscillation suppression test and put into operation successfully. NR Electric worked as the total solution provider for this project. The successful operation of the system enhances the damping performance of the complex resonance between the generator and the grid, and can effectively solve the torsional vibration problem of the turbine generator shaf...

On June 3, the Huzhou distributed power flow controller (DPFC) pilot project, developed and supplied by NR Electric, successfully withstood the manual short circuit test. The system responded accurately and the test results met the expectations. The success of this manual short-circuit test fully verified the ability of NR DPFC ability to withstand AC short-circuit current, AC fault ride through ability, and the accuracy of cooperation with AC line protection, marking that the 220 kV DPFC proje...

The Protection and Measurement division launches the IRxPRO range of relays for reliable and high-performance protection. IRIPRO-X (Overcurrent Protection Relay) The IRIPRO-X relays are the overcurrent protection relays designed for controlling, protecting & monitoring industrial, and utility distribution networks & substations.  These numerical relays have programmable digital outputs that can protect & monitor with a reliably fast protection solution in a single unit. They...

RECOM is launching its 16:1 ultra-wide input high-isolation quarter-brick DC/DC converter, ideal for rail and harsh industrial applications. The input range of the RPA150Q series is 14.4 V to 170 V (200 V for 1 s), and fully regulated available outputs are 12, 24, or 54 VDC with wide +10/−20% trim range (+18/−20% for 24 V output).  Efficiency is high across the operating range, and with sufficient airflow, 150 W output is available from −40°C up to at least 65&de...

OverIT looks forward to hosting the next OverIT Partners’ Training! Sessions will start on June 22nd, and last until June 24th, 2021. During the Training, partners will get the chance to learn how to implement the FSM solution. If users are interested in participating, please check out the registration page and learn how to become an OverIT Partner. Why join the Partner Training? The role of AI and AR is poised to grow tremendously in the coming years as organiz...

At Electric Ireland, they understand these are difficult times for their customers. One of their most frequently asked questions from customers is how to know if their bill is accurate.  There are supports in place to help with understanding energy bills and ensuring they are accurate. Most of these involve submitting own meter reading, and Electric Ireland have made it simpler than ever to submit their read in a way that suits them best. Why is there a need to submit meter reading? If t...

RECOM has added a 4A option to its RPX series of miniature buck converters. The RPX-4.0 is rated to 3.8 to 36V input and programmable 1 to 7V output at 4A. With a compact 5mm x 5.5mm footprint and low 4.1mm height in a thermally-enhanced QFN package, the buck module pushes the limit on power density. The product features on-off control, a power good signal, and soft start, and is fully protected including under-voltage, short-circuit, over-current, and over-temperature. Integrated shielded in...

The 15th (2021) International Photovoltaic Power Generation and Smart Energy Conference & Exhibition (SNEC) was held in Shanghai, China, from June 3 to 5, 2021. For the first time, Shanghai Electric Power Generation Group, Shanghai Electric New Energy Co., Ltd. and Shanghai Electric Guoxuan New Energy Technology Co., Ltd. formed a group to participate in the exhibition. With the theme 'Build A New Industrial Ecology and Create New Energy Values', the group displayed products and services on...

Cuvée Systems® has announced its EZI-Set series of ultra-compact LED drivers (non-dimmable) that offer superior performance with four form factors. The constant current output is configurable via dip-switches to maximize application flexibility, ease of use, and simplified inventory management for manufacturers and installers. These drivers are ideal for small form factor directional lighting applications using COBs, including downlights, spotlights and track lights. Three different...

Volta Trucks, the full-electric commercial vehicle manufacturer, has announced that it will implement QAD’s Adaptive ERP and other QAD Adaptive Applications solutions, including QAD EQMS (Enterprise Quality Management System), QAD DynaSys DSCP (Digital Supply Chain Management), QAD Sourcing and QAD Supplier Management. Volta Trucks will implement QAD company wide. “We are at a pivotal moment of a major transformation in the automotive industry,” said Volta Trucks' Chief Execu...

C&S Electric celebrated World Environment Day by planting trees across all its manufacturing plants and offices to recognize and highlight the importance of conserving the environment.  Mr. Prakash Kumar Chandraker, MD & CEO, and Mr. Manav Adlakha, CFO lead the tree plantation initiative across all the manufacturing plants. C&S Electric is committed to protecting the environment and employing eco-friendly practices in its operations.  Eco-friendly activities The company...

The electronics industry is one of the fastest-growing industries of the last half-century, and the amount of information generated by this industry can be mind-numbing. If the user is an electronics design engineer who utilizes product datasheets and user guides, they will very well know the challenges of finding accurate and consistent information across different manufacturers, product categories, and even product lines. design cycle Product information sharing has been revolutionized with...

RECOM announces the launch of a range of regulated SIP8 DC/DC converters with high power density and industrial temperature range. RECOM, the industry pioneer in power conversion, has announced the launch of the RS3E family of DC/DC converters in an industry-standard SIP8 format and pin-out. The parts are rated at 3W with no derating to 70°C and feature 2:1 input ranges of 4.5-9V, 9-18V, 18-36V, and 36-72V. RS3E family features Fully regulated outputs available are 3.3V, 5V, 9V, 12V, 15V...

Ameren Illinois customers living around southwest Champaign will see Energy at Work firsthand as the company constructs a $9.1 million state-of-the-art substation. The new facility, which reduces voltage from large transmission lines so electricity can be distributed homes and businesses, will enhance service reliability, flexibility, and load capacity of the company's local electric grid in Champaign and Bondville. Achieving several goals Ameren Illinois is constructing the substation with a...

Following the recent announcement of Volta Zero’s Italian introduction, Volta Trucks has confirmed that the world’s first purpose-built full electric 16-ton commercial vehicle will also make its customer debut in Germany from 14 June to 25 June, 2021, in Munich and Frankfurt.  This follows successful French and Spanish events where over 600 individual customer demonstrations of the Volta Zero have taken place and concludes the first stage of its mainland European customer tour....