By installing a new speed display, the local community of Leiwen is making an important contribution to the safety of all road users together with Westenergie. The company is supporting the community with a grant for the purchase.  Road safety "The display immediately shows every passing car the speed being driven," said Johannes Weis, First Deputy Mayor in Leiwen. Johannes Weis adds, "The data is stored anonymously and provides valuable information for further improving road safety at...

By installing a new speed display together with Westenergie, the local community of Rommersheim is making an important contribution to the safety of all road users in the Prüm collective municipality. The company is supporting the municipality with a grant to purchase the device.  improving road safety "The display immediately shows the speed of every passing car," said Local Mayor - Helmut Nober, adding "The data is stored anonymously and provides valuable information for furt...

A subsidiary of St. Louis-based Ameren Corporation has been selected by the regional transmission operator, the Midcontinent Independent System Operator (MISO), to develop a US$ 273 million transmission project across northern Missouri. “We are proud to have won this vital project that will give Missourians a more resilient energy grid and boost reliability for millions of people,” said Shawn Schukar, the Chairman and President of Ameren Transmission Company of Illinois (ATXI), a su...

Intelligent power management company - Eaton announced its new Green Motion DC fast chargers for commercial electric vehicles (EVs). The chargers are part of Eaton’s expansive electrical hardware, software, and engineering service solutions supporting fleet electrification with flexible, scalable, and reliable infrastructure. Designed for private fleets, Eaton’s Green Motion DC chargers enable fast charge times for high-powered light- and medium-duty EVs. Eaton offers mission-c...

Furukawa Electric Co., Ltd. has increased the quality of optical signal transmission at 800Gbps in the C+L band using an optical transmission system equipped with a Forward Raman Unit. Raman amplification Raman amplification is a supporting technology in optical fiber communication systems, and backward-pumped Raman amplification, which amplifies optical signals from the receiver side, is used normally. There were high expectations for forward Raman units given the broad bandwidth of th...

Furukawa Electric Co., Ltd. successfully improved the performance of the dual port pump laser for Raman amplifiers that is used as the pump laser for Raman amplifiers with high output and low power consumption. Background Following the recent appearance of generative AI (Artificial Intelligence) and machine learning, data traffic at data centers and other locations has exploded globally, and it is expected to grow further in the future. In response to this situation, communications speed needs...

Mitsubishi Electric Corporation announces that it will begin shipping samples of its latest optical device, a DFB-CAN with built-in wavelength monitor, on April 1. This innovative new light source, the industry's first to use the TO-56CAN package for digital coherent communication capable of high-speed, long-distance transmission, is expected to contribute to the realization of ultra-small, low-power consumption of optical transceiver modules. Intensity modulation methods Communication traff...

Furukawa Electric Co., Ltd. has achieved a 19dBm (approx. 80mW) optical output power from the ultra-small, narrow linewidth tunable light source, a laser product used as a light source in optical digital coherent communications. Following the recent appearance of generative AI (Artificial Intelligence) and machine learning, data traffic at data centers and other locations has exploded globally, and it is expected to grow further in the future. In response to this situation, progress is being ma...

A container for young people is available in the town of Bitburg at the central bus station (ZOB). The container offers young people a safe meeting place outside their own four walls. It is almost six meters long, two meters wide, and three meters high, and is equipped with a table, four chairs, a kettle, a shelf, and a table football table. The opening times are flexible and can be read weekly outside next to the door of the container. With the support of Westenergie, the Caritas Association W...

Schneider Electric and Mainspring Energy announced at the annual CERAWeek Conference that they are partnering to offer a new hybrid-energy technology that combines Schneider Electric’s EcoStruxure Microgrid Solution and turn-key design-build services with Mainspring’s groundbreaking Linear Generator. The combination provides power and fuel flexibility as well as energy resiliency for commercial and industrial customers. innovative energy solution As the energy sector seeks t...

The topic of digital substations and the application of the process bus according to the IEC-61850 standard is already a reality in the National Interconnected System (SIN). WEG, as a provider of protection and control systems (SPCS), has several projects in its portfolio that already apply this type of technology. One of them is the Vilhena Substation 230/138/69/13.8kV, with the implementation stage of the bar reactors for spans HX-6RB-02 and IX-6RB-03 of 230kV – 60MVAr, the first d...

Quanergy Solutions, Inc., a provider of 3D LiDAR technology, proudly announces two innovations for its Q-Track® solution; an industry-first cloud-based sensor coverage tool and full Windows compatibility. Both of these new products further improve the customers’ out-of-the-box experience for Quanergy’s Q-Track portfolio. Q-Track Coverage Tool The cloud-based Q-Track Coverage Tool is aimed at revolutionizing pre-deployment planning and site surveys. This innovative tool allows...

Schneider Electric, the pioneer in the digital transformation of energy management and automation, and Hy Stor Energy, a company pioneering carbon-free renewable hydrogen production and long-duration storage at scale announced they have signed a memorandum of understanding (MOU) to support the development of Hy Stor Energy’s Mississippi Clean Hydrogen Hub (MCHH) and its broader U.S. development platform. In this partnership, Schneider Electric and Hy Stor Energy are solving large-scale...

Innodisk, a renowned global AI solution provider, is demonstrating its edge AI integration expertise at NVIDIA GTC (GTC 2024) in San Jose, USA. Innodisk specializes in integrating and developing customizable AI solutions that can be scaled across various industries. The company actively shares its research and practical implementation of edge AI with industries worldwide, showcasing how its camera modules integrate with NVIDIA’s specialized AI visual technology. Advancing Smart Factory S...

Cables pioneer - AEI Cables is highlighting the need for the supply chain to be aware of the various pieces of legislation and guidance in the selection of cables to help make Britain’s buildings safer. The systems powered by these cables including smoke and heat extraction systems assist fire services in firefighting and a safe evacuation in the case of life safety. Selection and installation of cables The company has been communicating the importance of following the technical guidanc...

The energy service provider and infrastructure provider - Westenergie, together with the administration of Traben-Trarbach, has modernized the lighting in the car park of the Moseltherme in Wildsteiner Weg and supplied a new light mast with state-of-the-art LED light heads. Representatives of the Traben-Trarbach municipality and Westenergie employees now symbolically inspected the new technology and were convinced of the advantages of the modernization.  energy savings Westenergie is cov...

Ingeteam strengthens its leadership in the renewable hydrogen sector. In addition to the projects already commissioned in the last year and a half, it has a portfolio of over 400 MW of awarded projects to be delivered in 2024. The projects are distributed all over the world, in destinations such as Australia, Canada, the United States, Germany, Spain, and other European countries. Ingeteam currently has rectifiers feeding different PEM and alkaline electrolyzers in plants in Spain, Belgium, and...

Following extensive investigations, Axpo has decided to discontinue its planned solar project in Glarus Süd. The reasons behind this decision are natural hazards, limited environmental compatibility and low energy yield.  Axpo and the municipality of Glarus Süd regret this decision. Axpo will continue to invest in sustainable forms of energy and drive its Alpine projects forward. Levels of solar radiation The required land would have remained usable as pasture after constructio...

The rehearsal rooms of the Grün-Weiß Lembeck e. V. marching band is located in the basement of the former Laurentiusschule and has a large outdoor area that can be reached via an external staircase. Outdoor rehearsals, barbecues, and other events take place outside in the summer. In order to enable safer access to the outdoor area, the desire for a handrail for the outdoor staircase arose. active local employee initiative When Markus Droste, an employee of Westenergie AG, heard abo...

The municipalities of the Prüm collective municipality will continue to work with Westenergie AG in the operation and modernization of street lighting. Representatives of the collective municipality and the municipalities met with representatives of Westenergie in Prüm to symbolically sign the extension of the relevant contracts. The service agreements entitled 'Light & Service' were extended for a further ten years.  energy-saving technology "We will be able to significant...

Together with the city of Simmern, Westenergie AG is supporting the modernization of LED lights throughout the city. In the city of Simmern, 921 new and environmentally friendly LED lights are now providing efficient and energy-saving lighting. City Mayor - Dr. Andreas Nikolay and Westenergie Regional Manager - Florian Schmidt were on site to get an idea of ​​the modernization.  LED technology "With the new, longer-lasting LED technology, we are not only easing the burden on the city's b...

Furukawa Electric Co., Ltd. was selected by the National Institute of Information and Communication Technology (NICT) through open bidding for Research Project: R&D of bandwidth expanding optical node technologies for realizing ultra-fast, large capacity networks under the 2024 Function Realization and International Joint R&D Program ‘Innovative ICT Fund Projects for Beyond 5G/6G.’ As data volumes increase due to the shift to B5G (6G) and the promotion of cloud computing, it...

The local community of Bruschied is ensuring greater safety on the roads with the help of Westenergie AG. Road safety is an important building block for increasing road safety. The infrastructure provider - Westenergie is, therefore, supporting the local community financially in this project with the purchase of three new speed measuring systems. speed measuring systems Two of the systems are located at the entrances to the town and one system is in the Rudolfshaus district. The speed measuri...

New disruptive technologies are emerging and shaping the future of FSM: Augmented Reality, Machine Learning, IoT, GIS, and sensors. OverIT is recognized as the best transformational partner to accompany and guide customers in this evolution path and to manage FSM mission-critical operations. OverIT has a strategic goal: to continue anticipating FSM market needs, unleashing the full potential of its vibrant partner ecosystem. So, it is time to write a new chapter for our software. next-gen FSM...

In the recent vote, the electorate of the municipality of Oberiberg in the canton of Schwyz expressed their opposition to the planned alpine solar project - Alpin Solar Ybrig. Axpo and the local energy provider - EWS AG are disappointed about their decision. Due to the negative result of the vote, the project will not be pursued further. However, both companies remain firmly committed to developing further projects in the field of renewable energy. Alpin Solar Ybrig solar project opposed Axpo...

Siemens has developed one of the world’s most innovative circuit protection devices with cutting-edge electronic switching technology. SENTRON ECPD (Electronic Circuit Protection Device) electronically switches off circuit faults if errors occur and, if necessary, trips the mechanical isolating contact downstream.  circuit protection Up until recently, disconnection was handled purely through electro-mechanical elements.  “This innovation offers a variety of benefits an...

Siemens and Enlighted, a pioneering property technology company owned by Siemens, announced a strategic partnership with Zumtobel Group, a global lighting solutions provider, to advance the adoption of smart building technologies including intelligent IoT lighting, setting new standards for efficiency and sustainability in building operations worldwide. At the core of the partnership lies the technical integration of Enlighted's industry-pioneering smart sensors into Zumtobel Group's lighting p...

Offshore wind is undergoing transformational improvement as a key solution to the energy transition. The continuous iteration and evolution of wind turbine technology have enabled developers to venture into deeper waters and to tap further wind resources. MingYang Smart Energy is always motivated to drive this trend through innovation and has reached a new milestone with the introduction of the new MySE 16.0-242, the world’s largest Hybrid Drive wind turbine. Designed for high-wind IEC IB...

MingYang Smart Energy has signed an agreement with the worldwide pioneering certification body DNV GL to conduct Type Certification for its new MySE11-203 offshore wind turbine. The virtual signing ceremony took place on 28th September 2020. Qiying Zhang, Executive President of MingYang, Kim Mørk, Executive Vice President of Renewables Certification of DNV GL, and other representatives from the two sides attended the signing ceremony. design of the MySE platform  MingYang’s...

TL Aerotek was looking for an automated solution to keep up with accelerating demand and found success using Mitsubishi Electric Automation’s plug-and-play machine tending solution, LoadMate Plus™. Expand Machinery TL Aerotek, a small-job milling shop customer, experienced a large influx of orders. To keep up with demand, they sought a solution that would alleviate labor uncertainty and help to grow the business. TL Aerotek turned to their long-time supplier of milling machines fo...