The China Electricity Council has recently announced the energy efficiency benchmarking results of thermal power units in the power industry in 2020. Shanghai Electric's electromechanical equipment is used in all of the units on the AAAAA-level list in the ultra-supercritical 1000 MW wet-cooling category for the third year in a row. And Shanghai Electric has supplied electromechanical furnaces to 61.6% of all the units listed. thermal power generation The benchmarking activity has selected th...
On June 26, 2021, after 168 hours of trial operation, the Yazhong Jiangxi ±800 kV HVDC transmission project was officially put into operation. NR provides a complete set of core equipment for the project, such as a UHV converter valve, protection & control, valve cooling, synchronous condenser secondary system, measurement and fire protection system, etc. hydro, wind, and solar power transmission The surging power from the middle reaches of the Yalong River will light up the urban...
On June 28, 2021, The first batch of units of the Baihetan Hydropower Station on the Jinsha River completed the 72-hour trial operation and officially put into commercial operation, which is the world's largest hydropower project under construction with the highest single-unit capacity. As the main secondary equipment supplier, NR provides a complete set of key equipment for the project, such as generator transformer unit protection, switchyard protection, information management system, and oth...
The energy transition is one of the greatest contemporary challenges facing the Netherlands. On 24th June, 2021, IFV and DNV signed a letter of intent, regarding their collaboration on a safe energy transition. Based on a shared vision of a safe energy transition, the Netherlands Institute for Safety (IFV) and DNV have the ambition to intensify their strategic collaboration, in the coming years, in order to make a bigger joint impact and to be able to make a greater contribution to a safe energ...
Increased renewable generation and large, complex power networks mean that different parts of the grid are not always perfectly synchronized, which can cause the power to fluctuate. To guard against fluctuations in power supply, traditional power grids have synchronous generators which can help mitigate oscillations due to their inertia. However, with the increasing penetration of inverter-dominated renewable power plants, the power grids inertia is decreasing. This can reduce the quality of th...
A trend-setting project on climate protection has now been launched by three traditional companies along the Rhine and Ruhr, in Germany. It is planned to supply industrial waste heat from thyssenkrupp Steel to the König brewery through a new steam transfer line managed by E.ON, in order to provide the thermal energy required for the brewery processes. E.ON signs long-term cooperation agreement For this purpose, waste heat steam from steel production at thyssenkrupp Steel’s Ruhrort...
RECOM has launched an eighth-brick DC/DC converter series with 9-60 VDC input and optional 12, 24, or 48 V outputs rated at 150 W. The RPA150E series has an industry-standard pin-out with outputs trimmable over a wide ±20% range to include 28 V for avionic systems and 57 V for PoE applications. The 6:1 input range covers nominal 12, 24, and 48 V system rails with sufficient margin to include 48 V battery charging voltage and 12 V battery cranking voltage dips. High efficiency of the RPA...
Supporting E.ON’s digital ambitions, Sebastian Weber and Christopher d’Arcy will become Managing Directors of E.ON Digital Technology GmbH as of July 1, 2021 and will report directly to Victoria Ossadnik, E.ON SE Board Member for Digital. Sebastian Weber will act as group-wide CTO for E.ON, overseeing the expansion of digital platforms and IT operations. Christopher d’Arcy will be responsible as Senior Vice President for Digital & Technology Expert Services with accountabi...
DENSO, a mobility supplier announced it invested in Seurat Technologies, participating in the metal additive manufacturer’s Series B funding round. The investment will help speed the development and commercialization of Seurat’s patented additive manufacturing technology and is DENSO’s latest move to bolster its digital transformation. Area Printing™ technology Seurat’s Area Printing™ technology allows manufacturers to print metal parts at scale Seurat&rsq...
E.ON will continue its successful cooperation with RWTH Aachen University and has extended the existing cooperation agreement for another five years. A corresponding agreement was signed on 23 June by E.ON Board Member, Dr. Karsten Wildberger and the Rector of RWTH Aachen University, Professor Ulrich Rüdiger. Energy and sustainability research "With the new cooperation agreement, we will particularly promote research projects in the areas of energy and sustainability research, energy sys...
Aggreko is accelerating its investments in hydrogen technology. This step is part of its Net Zero program and will enhance the company’s capability to provide emission-free temporary power worldwide. At present, the pioneer in mobile and modular energy solutions is focusing on two different technologies. hydrogen combustion genset demonstrator Together with cleantech partner CMB.TECH, a 50 kVA hydrogen combustion genset demonstrator has been developed. After successful testing, Aggr...
On June 7, 2021, the generator terminal sub-synchronous damping control (GTSDC) system of Datang Xilinhaote (Xilinhot) power plant completed the oscillation suppression test and put into operation successfully. NR Electric worked as the total solution provider for this project. The successful operation of the system enhances the damping performance of the complex resonance between the generator and the grid, and can effectively solve the torsional vibration problem of the turbine generator shaf...
On June 3, the Huzhou distributed power flow controller (DPFC) pilot project, developed and supplied by NR Electric, successfully withstood the manual short circuit test. The system responded accurately and the test results met the expectations. The success of this manual short-circuit test fully verified the ability of NR DPFC ability to withstand AC short-circuit current, AC fault ride through ability, and the accuracy of cooperation with AC line protection, marking that the 220 kV DPFC proje...
The Protection and Measurement division launches the IRxPRO range of relays for reliable and high-performance protection. IRIPRO-X (Overcurrent Protection Relay) The IRIPRO-X relays are the overcurrent protection relays designed for controlling, protecting & monitoring industrial, and utility distribution networks & substations. These numerical relays have programmable digital outputs that can protect & monitor with a reliably fast protection solution in a single unit. They...
Every developer looks forward to the moment when he knows that his prototype is finally working, all key functions have been realized and the software is fully implemented except for the diagnostic functions. At the next meeting, he proudly announces that all that is needed at this stage is the EMC approval and a suitable power supply. However, given the limited resources, designing a power supply in-house is not an option, as crucial deadlines would be missed. The team thus agrees to go...
In-Charge Energy, the pioneer in turnkey commercial fleet EV infrastructure solutions, has announced its latest hardware offerings for fleet EV charging. These innovative products address the unique reliability, durability, accessibility, and serviceability needs of fleet owners, managers, and drivers from nighttime visibility and safety to ruggedness for extreme weather conditions. User-friendly charging options A well-designed charging infrastructure can optimize an entire fleet, reducing t...
Axpo is further strengthening its position in the UK energy market. Its subsidiary, Axpo UK Ltd and French solar developer, Voltalia have signed a new ten-year, fixed price power purchase agreement (PPA), it was announced recently. Thereby, Axpo UK will purchase 100% of the electricity, Renewables Obligation Certificates (ROCs), and Renewable Energy Guarantees of Origin (REGOs) from Voltalia’s 7.2 MW Tonge solar park near Sittingbourne, in Kent, England. Axpo - Voltalia partnership Axpo...
Würth Elektronik and Unleash Future Boats unveiled the ‘ZeroOne’ prototype for an emission-free, autonomous watercraft at the GREENTECH FESTIVAL in Berlin. Würth Elektronik is a technology partner of the start-up and supports with modern electronics to make the revolutionary concept for emission-free water vehicles of the future a reality. With their start-up Unleash Future Boats GmbH, developers Stefanie and Lars Engelhard, who come from the automotive industry, are worki...
The Technology Progress Report, a new supplement to DNV’s annual Energy Transition Outlook, considers safety, efficiency, and competitiveness as well as the technical capability of these technologies, to deliver the deep decarbonization the world is striving for. decarbonized energy system Remi Eriksen, the Group President and CEO of DNV said, “The world needs to transition faster to a deeply decarbonized energy system, reducing emissions by around 8% each year to ensure an energy...
DNV, the independent energy expert and assurance provider, has acted as a technical consultant through the testing and verification of Brill Power’s new battery management system (BMS) technology. This testing confirms that Brill Power’s novel BMS concept brings advantages for a number of key battery characteristics like higher utilized pack capacity, that potentially results in lower lifetime cost. DNV tested Brill Power’s new battery management system technology in its Batt...
At Electric Ireland, they understand these are difficult times for their customers. One of their most frequently asked questions from customers is how to know if their bill is accurate. There are supports in place to help with understanding energy bills and ensuring they are accurate. Most of these involve submitting own meter reading, and Electric Ireland have made it simpler than ever to submit their read in a way that suits them best. Why is there a need to submit meter reading? If t...
RECOM has added a 4A option to its RPX series of miniature buck converters. The RPX-4.0 is rated to 3.8 to 36V input and programmable 1 to 7V output at 4A. With a compact 5mm x 5.5mm footprint and low 4.1mm height in a thermally-enhanced QFN package, the buck module pushes the limit on power density. The product features on-off control, a power good signal, and soft start, and is fully protected including under-voltage, short-circuit, over-current, and over-temperature. Integrated shielded in...
Railways are relied upon as a means for transporting passengers and goods across short, medium, and long distances. In modern railway systems, electricity is a convenient source to power an efficient mass transportation system. An important part of this electrical system is the traction power substations whose function is to convert the incoming commercial electrical supply to a form usable by the motive power on the train. traction power systems The electrical energy from the traction...
The 15th (2021) International Photovoltaic Power Generation and Smart Energy Conference & Exhibition (SNEC) was held in Shanghai, China, from June 3 to 5, 2021. For the first time, Shanghai Electric Power Generation Group, Shanghai Electric New Energy Co., Ltd. and Shanghai Electric Guoxuan New Energy Technology Co., Ltd. formed a group to participate in the exhibition. With the theme 'Build A New Industrial Ecology and Create New Energy Values', the group displayed products and services on...
Volta Trucks, the full-electric commercial vehicle manufacturer, has announced that it will implement QAD’s Adaptive ERP and other QAD Adaptive Applications solutions, including QAD EQMS (Enterprise Quality Management System), QAD DynaSys DSCP (Digital Supply Chain Management), QAD Sourcing and QAD Supplier Management. Volta Trucks will implement QAD company wide. “We are at a pivotal moment of a major transformation in the automotive industry,” said Volta Trucks' Chief Execu...
On May 28, 2021, Shanghai Electric Digital Technology Co., Ltd. and Shanghai Kezhi Electric Automation Co., Ltd. (Kezhi Electric) held a signing ceremony at the headquarter of Shanghai Electric Group, indicating that Shanghai Electric Digital Technology became the controlling shareholder of Kezhi Electric. To boost digital transformation, Shanghai Electric orients at smart energy, intelligent manufacturing and smart cities and endeavors to build an ‘industrial ecology’ comprising sm...
C&S Electric celebrated World Environment Day by planting trees across all its manufacturing plants and offices to recognize and highlight the importance of conserving the environment. Mr. Prakash Kumar Chandraker, MD & CEO, and Mr. Manav Adlakha, CFO lead the tree plantation initiative across all the manufacturing plants. C&S Electric is committed to protecting the environment and employing eco-friendly practices in its operations. Eco-friendly activities The company...
The electronics industry is one of the fastest-growing industries of the last half-century, and the amount of information generated by this industry can be mind-numbing. If the user is an electronics design engineer who utilizes product datasheets and user guides, they will very well know the challenges of finding accurate and consistent information across different manufacturers, product categories, and even product lines. design cycle Product information sharing has been revolutionized with...
RECOM announces the launch of a range of regulated SIP8 DC/DC converters with high power density and industrial temperature range. RECOM, the industry pioneer in power conversion, has announced the launch of the RS3E family of DC/DC converters in an industry-standard SIP8 format and pin-out. The parts are rated at 3W with no derating to 70°C and feature 2:1 input ranges of 4.5-9V, 9-18V, 18-36V, and 36-72V. RS3E family features Fully regulated outputs available are 3.3V, 5V, 9V, 12V, 15V...
Ameren Illinois customers living around southwest Champaign will see Energy at Work firsthand as the company constructs a $9.1 million state-of-the-art substation. The new facility, which reduces voltage from large transmission lines so electricity can be distributed homes and businesses, will enhance service reliability, flexibility, and load capacity of the company's local electric grid in Champaign and Bondville. Achieving several goals Ameren Illinois is constructing the substation with a...
