On June 26, 2021, after 168 hours of trial operation, the Yazhong Jiangxi ±800 kV HVDC transmission project was officially put into operation. NR provides a complete set of core equipment for the project, such as a UHV converter valve, protection & control, valve cooling, synchronous condenser secondary system, measurement and fire protection system, etc. hydro, wind, and solar power transmission The surging power from the middle reaches of the Yalong River will light up the urban...

On June 28, 2021, The first batch of units of the Baihetan Hydropower Station on the Jinsha River completed the 72-hour trial operation and officially put into commercial operation, which is the world's largest hydropower project under construction with the highest single-unit capacity. As the main secondary equipment supplier, NR provides a complete set of key equipment for the project, such as generator transformer unit protection, switchyard protection, information management system, and oth...

A trend-setting project on climate protection has now been launched by three traditional companies along the Rhine and Ruhr, in Germany. It is planned to supply industrial waste heat from thyssenkrupp Steel to the König brewery through a new steam transfer line managed by E.ON, in order to provide the thermal energy required for the brewery processes. E.ON signs long-term cooperation agreement For this purpose, waste heat steam from steel production at thyssenkrupp Steel’s Ruhrort...

RECOM has launched an eighth-brick DC/DC converter series with 9-60 VDC input and optional 12, 24, or 48 V outputs rated at 150 W. The RPA150E series has an industry-standard pin-out with outputs trimmable over a wide ±20% range to include 28 V for avionic systems and 57 V for PoE applications. The 6:1 input range covers nominal 12, 24, and 48 V system rails with sufficient margin to include 48 V battery charging voltage and 12 V battery cranking voltage dips. High efficiency of the RPA...

Supporting E.ON’s digital ambitions, Sebastian Weber and Christopher d’Arcy will become Managing Directors of E.ON Digital Technology GmbH as of July 1, 2021 and will report directly to Victoria Ossadnik, E.ON SE Board Member for Digital. Sebastian Weber will act as group-wide CTO for E.ON, overseeing the expansion of digital platforms and IT operations. Christopher d’Arcy will be responsible as Senior Vice President for Digital & Technology Expert Services with accountabi...

E.ON will continue its successful cooperation with RWTH Aachen University and has extended the existing cooperation agreement for another five years. A corresponding agreement was signed on 23 June by E.ON Board Member, Dr. Karsten Wildberger and the Rector of RWTH Aachen University, Professor Ulrich Rüdiger. Energy and sustainability research "With the new cooperation agreement, we will particularly promote research projects in the areas of energy and sustainability research, energy sys...

Aggreko is accelerating its investments in hydrogen technology. This step is part of its Net Zero program and will enhance the company’s capability to provide emission-free temporary power worldwide. At present, the pioneer in mobile and modular energy solutions is focusing on two different technologies. hydrogen combustion genset demonstrator Together with cleantech partner CMB.TECH, a 50 kVA hydrogen combustion genset demonstrator has been developed. After successful testing, Aggr...

On June 7, 2021, the generator terminal sub-synchronous damping control (GTSDC) system of Datang Xilinhaote (Xilinhot) power plant completed the oscillation suppression test and put into operation successfully. NR Electric worked as the total solution provider for this project. The successful operation of the system enhances the damping performance of the complex resonance between the generator and the grid, and can effectively solve the torsional vibration problem of the turbine generator shaf...

On June 3, the Huzhou distributed power flow controller (DPFC) pilot project, developed and supplied by NR Electric, successfully withstood the manual short circuit test. The system responded accurately and the test results met the expectations. The success of this manual short-circuit test fully verified the ability of NR DPFC ability to withstand AC short-circuit current, AC fault ride through ability, and the accuracy of cooperation with AC line protection, marking that the 220 kV DPFC proje...

The Protection and Measurement division launches the IRxPRO range of relays for reliable and high-performance protection. IRIPRO-X (Overcurrent Protection Relay) The IRIPRO-X relays are the overcurrent protection relays designed for controlling, protecting & monitoring industrial, and utility distribution networks & substations.  These numerical relays have programmable digital outputs that can protect & monitor with a reliably fast protection solution in a single unit. They...

Every developer looks forward to the moment when he knows that his prototype is finally working, all key functions have been realized and the software is fully implemented except for the diagnostic functions. At the next meeting, he proudly announces that all that is needed at this stage is the EMC approval and a suitable power supply.  However, given the limited resources, designing a power supply in-house is not an option, as crucial deadlines would be missed. The team thus agrees to go...

RECOM is launching its 16:1 ultra-wide input high-isolation quarter-brick DC/DC converter, ideal for rail and harsh industrial applications. The input range of the RPA150Q series is 14.4 V to 170 V (200 V for 1 s), and fully regulated available outputs are 12, 24, or 54 VDC with wide +10/−20% trim range (+18/−20% for 24 V output).  Efficiency is high across the operating range, and with sufficient airflow, 150 W output is available from −40°C up to at least 65&de...

OverIT looks forward to hosting the next OverIT Partners’ Training! Sessions will start on June 22nd, and last until June 24th, 2021. During the Training, partners will get the chance to learn how to implement the FSM solution. If users are interested in participating, please check out the registration page and learn how to become an OverIT Partner. Why join the Partner Training? The role of AI and AR is poised to grow tremendously in the coming years as organiz...

At Electric Ireland, they understand these are difficult times for their customers. One of their most frequently asked questions from customers is how to know if their bill is accurate.  There are supports in place to help with understanding energy bills and ensuring they are accurate. Most of these involve submitting own meter reading, and Electric Ireland have made it simpler than ever to submit their read in a way that suits them best. Why is there a need to submit meter reading? If t...

RECOM has added a 4A option to its RPX series of miniature buck converters. The RPX-4.0 is rated to 3.8 to 36V input and programmable 1 to 7V output at 4A. With a compact 5mm x 5.5mm footprint and low 4.1mm height in a thermally-enhanced QFN package, the buck module pushes the limit on power density. The product features on-off control, a power good signal, and soft start, and is fully protected including under-voltage, short-circuit, over-current, and over-temperature. Integrated shielded in...

The 15th (2021) International Photovoltaic Power Generation and Smart Energy Conference & Exhibition (SNEC) was held in Shanghai, China, from June 3 to 5, 2021. For the first time, Shanghai Electric Power Generation Group, Shanghai Electric New Energy Co., Ltd. and Shanghai Electric Guoxuan New Energy Technology Co., Ltd. formed a group to participate in the exhibition. With the theme 'Build A New Industrial Ecology and Create New Energy Values', the group displayed products and services on...

Cuvée Systems® has announced its EZI-Set series of ultra-compact LED drivers (non-dimmable) that offer superior performance with four form factors. The constant current output is configurable via dip-switches to maximize application flexibility, ease of use, and simplified inventory management for manufacturers and installers. These drivers are ideal for small form factor directional lighting applications using COBs, including downlights, spotlights and track lights. Three different...

Volta Trucks, the full-electric commercial vehicle manufacturer, has announced that it will implement QAD’s Adaptive ERP and other QAD Adaptive Applications solutions, including QAD EQMS (Enterprise Quality Management System), QAD DynaSys DSCP (Digital Supply Chain Management), QAD Sourcing and QAD Supplier Management. Volta Trucks will implement QAD company wide. “We are at a pivotal moment of a major transformation in the automotive industry,” said Volta Trucks' Chief Execu...

C&S Electric celebrated World Environment Day by planting trees across all its manufacturing plants and offices to recognize and highlight the importance of conserving the environment.  Mr. Prakash Kumar Chandraker, MD & CEO, and Mr. Manav Adlakha, CFO lead the tree plantation initiative across all the manufacturing plants. C&S Electric is committed to protecting the environment and employing eco-friendly practices in its operations.  Eco-friendly activities The company...

The electronics industry is one of the fastest-growing industries of the last half-century, and the amount of information generated by this industry can be mind-numbing. If the user is an electronics design engineer who utilizes product datasheets and user guides, they will very well know the challenges of finding accurate and consistent information across different manufacturers, product categories, and even product lines. design cycle Product information sharing has been revolutionized with...

RECOM announces the launch of a range of regulated SIP8 DC/DC converters with high power density and industrial temperature range. RECOM, the industry pioneer in power conversion, has announced the launch of the RS3E family of DC/DC converters in an industry-standard SIP8 format and pin-out. The parts are rated at 3W with no derating to 70°C and feature 2:1 input ranges of 4.5-9V, 9-18V, 18-36V, and 36-72V. RS3E family features Fully regulated outputs available are 3.3V, 5V, 9V, 12V, 15V...

Ameren Illinois customers living around southwest Champaign will see Energy at Work firsthand as the company constructs a $9.1 million state-of-the-art substation. The new facility, which reduces voltage from large transmission lines so electricity can be distributed homes and businesses, will enhance service reliability, flexibility, and load capacity of the company's local electric grid in Champaign and Bondville. Achieving several goals Ameren Illinois is constructing the substation with a...

Volta Trucks, the start-up electric commercial vehicle manufacturer, has revealed the first running prototype chassis of the Volta Zero, the world’s first purpose-built full-electric 16-tonne commercial vehicle designed specifically for inner city logistics. This major milestone in the company’s journey has been achieved at a good pace. Volta Zero prototype The Volta Zero will be Europe’s first commercial vehicle to use an innovative eAxle The first running Volta Zero proto...

Following the recent announcement of Volta Zero’s Italian introduction, Volta Trucks has confirmed that the world’s first purpose-built full electric 16-ton commercial vehicle will also make its customer debut in Germany from 14 June to 25 June, 2021, in Munich and Frankfurt.  This follows successful French and Spanish events where over 600 individual customer demonstrations of the Volta Zero have taken place and concludes the first stage of its mainland European customer tour....

Ofgem, the energy regulator, has set out final proposals to help millions of micro business customers get a better energy deal. Energy brokers help busy micro businesses to compare the market and find a better deal on their energy. But Ofgem found a minority of brokers engage in poor practices with opaque fees for brokerage services. In one case, 50% of the total contract cost (around £24,000) comprised broker commission fees that the consumer was not made aware of pre-contract.  Su...

EDF Renewables Ireland is announcing plans to develop a 100MW wind farm to the south of Bellacorick in Mayo. The proposed project, which could consist of up to 25 turbines and power more than 60,000 homes, will be located in a forested area to the northeast of Slieve Carr, approximately 8km southeast of Bangor Erris. environmental studies The project team is currently gathering wind data and mapping the environmental constraints on the site The project team is currently gathering wind data a...

The waste heat specialist Orcan Energy has won a new major customer: The CleanTech company is installing its waste heat solutions at Nordenhamer Zinkhütte GmbH, a subsidiary of the raw materials group Glencore and a company with a long tradition in zinc production. "With this new cooperation, our products are being used in zinc production for the first time," says Andreas Sichert, founder and CEO of Orcan Energy. Module installation The company is achieving a significant reduction in ele...

DENSO, a mobility supplier, has signed a long-term agreement with aerospace pioneer - Honeywell, establishing an alliance focused on electric propulsion units to meet new aerospace needs. Drawing from their automotive and aerospace backgrounds, the companies will develop and manufacture electric propulsion systems for aircraft, initially prioritizing the urban air mobility (UAM) segment with a focus on air taxis and delivery vehicles. electric propulsion systems DENSO and Honeywell are in adv...

EDF Renewables is planning to develop a 49.9 MW solar farm in Glassthorpe between the villages of Flore and Upper Heyford, along the M1 Corridor, which will be capable of generating enough low-carbon electricity for the domestic needs of 9,562 households annually. A number of ecological and feasibility surveys have been carried out and the company is consulting with local people at an early stage about the proposal to get their views ahead of submitting a planning application later this year.&n...

The operating environment for mains-powered electrical equipment is separated into four overvoltage category (OVC) areas according to their level of surge protection. This article describes how these four areas differ and how the AC/DC power supplies rated for the OVC II area might be used in the OVC III area in certain circumstances. International standards Most users of mains-powered equipment are confident that they can simply plug in their device to a convenient socket, and their device w...