Product News

Luminus Devices introduces the next Generation for high lumen density, white COB arrays featuring the latest enhancement to improve maximum operating temperature, Robusto technology. High-lumen density High-lumen density parts are used in narrow beam applications where Center Beam Candle Power (CBCP) is the key metric. While this depends on the specific beam angle and power level, the high-lumen density parts typically deliver two times or greater lumen density than standard parts. Higher tem...

SIGLENT’s SDG7000A is a family of dual-channel Arbitrary Waveform Generators that feature up to 1 GHz bandwidth, a maximum sample rate of 5 GSa/s, and 14-bit vertical resolution. It can generate arbitrary waveforms point by point with a maximum 2.5 GSa/s sample rate and vector signal with a maximum of 500 MS/s. It also can generate a variety of signals such as continuous wave, Pulse, Noise, PRBS patterns, and a 16-bit digital bus. It supports the generation of complex signals such as mo...

OVC III, power-dense AC/DC modules feature a wide input range and high isolation. RECOM has added a 20W part to its ‘E-K’ range of encapsulated, PCB-mount AC/DC modules, the RAC20E-K/277. Even though it is economically designed, the series is dimensionally of the same size as the existing 20W at just 52.7 mm x 27.6 mm footprint, but with a different pinning that is compatible with further industry standards. It also features full load operation over a very wide input range of 85&nda...

Würth Elektronik presents slim Bluetooth Low Energy radio module Proteus-e. With the new Proteus-e radio module, Würth Elektronik is continuing its successful Proteus Bluetooth Low Energy series. The focus of the Proteus-e is on basic Bluetooth functionality in order to address price-sensitive applications. The radio module is based on the Bluetooth Low Energy 5.1 standard and includes certificates of conformity for CE, FCC, IC, and TELEC. Despite the integrated antenna, the Proteus-e...

Havells India Limited, a Fast Moving Electrical Goods (FMEG) company unveiled its revolutionary range of energy-efficient ECOACTIV fans by launching 19 new models under the ceiling, pedestal, wall, and ventilator fan category for the upcoming summer season. The new range of technologically advanced fans comes equipped with ECOACTIV super-efficient BLDC and induction motor. The basket covering models based on ECOACTIV technology delivers excellent performance and consumes lower energy offering c...

ABB is working with SEV, the main electrical power producer and distributor for the Faroe Islands, to deliver innovative Synchronous Condenser (SC) technology that will stabilize its power grid as renewable generation replaces fossil-fueled plants. The first SC unit is currently being commissioned on the island of Suðuroy. SEV has now placed an order for a similar unit to be located at Sund on Streymoy, the Faroes’ largest and most populous island. 2030 Green Energy Goal SEV to gene...

    Following its successful entry into the consumer unit market last year, Scolmore has expanded its Elucian range with a number of SPD populated units. Elucian Switch-Disconnector Units and Combination Units are both now available with SPDs pre-installed, giving installers greater flexibility when working on a range of projects.      The Switch-Disconnector Unit range of Metal Consumer Units are furnished with a 100A Mains Switch and a 2 Pole Type 2...

Furukawa Electric Co., Ltd. collaborates with Senko Advance Co., Ltd. to develop, manufacture, and sell a small MT ferrule for Senko Advance’s SN®-MT connector, a next-generation small multi-fiber connector that enables high-density optical connectivity. Through this new development, Furukawa will realize next-generation high-density optical connectivity and promote its practical use in data centers. Background The SN®-MT connector can realize more than 2.7 times higher de...

Scolmore continues to expand its Elucian consumer unit range to provide electricians with the broadest possible range of units and protective devices to cater to all installation requirements. New to the range are Time Delay RCDs, higher-rated RCBOs, and a retro-fit locking device. Time Delay RCDs A new range of Type S 2 Pole 100mA Time Delay RCDs available in 63A, 80A & 100A options have now been added to the range. Time delay RCDs provide residual circuit protection against short cir...

Luminus Devices announces the launch and immediate availability of a new high-efficacy family of 5050 Mid-Power LEDs designed with sulfur resistance for high performance and long-term reliability in outdoor lighting and horticulture applications. MP-5050-250R LEDs These new MP-5050-250R high-performance LEDs provide low thermal resistance, up to 185 lumens/Watt, high PPF/W, and CRI options of 70, 80, and 90 minimum. In addition, they are compatible with automatic placement equipment and are R...

Würth Elektronik complements its infrared product range with the new WL-SIQW SMT Infrared QFN LED Waterclear product series. The LEDs in Quad Flat No Leads (QFN) format are available in 2720, 3535 and 3737 packages, with different radiant intensities from 125 to 800 mW/sr and in 90°, 120° or 150° beam angles. WL-SIQW components Depending on the application, the infrared sources are available in wavelengths of 850 or 940 nm. The SMT-mountable WL-SIQW components are suitable for...

Canadian bus manufacturer Letenda officially unveiled its new generation of zero-emission transit buses. Electrified powertrain solution Powered by Cummins, the Electrip® is the first model in the Letenda line of battery-electric transit buses designed specifically to operate in Canadian winter conditions using electric propulsion. At 30 feet long, this flat-foot bus can accommodate up to 45 people, including 24 seated passengers and up to six wheelchairs. The bus utilizes the Cummins com...

The globally renowned manufacturer of electronic and electrical components, Würth Elektronik has expanded its optoelectronic portfolio, with optocouplers in all common packages and CTR (Current Transfer Ratio) values. This includes the WL-OCPT series of phototransistor optocouplers in DIP-4, SOP-4 and LSOP-4 packages. WL-OCDA Darlington optocouplers The WL-OCDA Darlington optocoupler series is available as DIP-4 and SOP-4. These different packages are also available in a range of lead fr...

With the magnetically shielded bar core choke WE-CHSA Performance, Würth Elektronik expands its portfolio of qualified products for automotive applications. The SMT high-current inductor represents an extension to the proven WE-CHSA series and differs from it only by a newly developed core material. As a result, WE-CHSA P - "P" as in performance achieves the best saturation behavior among comparable components on the market. The choke has a current-carrying capacity of up to 28 A and an op...

Siemens Smart Infrastructure (Siemens) in the U.S. have unveiled a new sustainable, EV charging concept structure, which is designed for electrifying fleets and high demand charging applications at scale. VersiCharge XL concept The new VersiCharge XL concept (UL standard) was created to electrify new or existing parking lots and building structures quickly and efficiently, by using a modular, scalable design, which has been made in partnership with Nexii Building Solutions (Nexii), using their...

The test engineering division of REO UK has developed the REOLAB 220, a range of three-phase high current, low voltage AC variable power supplies for test laboratories. The REOLAB 220 units can supply voltages of up to 10 V and currents up to 10kA (10,000 Amps), but this can be tailored to meet customer requirements. REOLAB 220 units REO UK is providing the REOLAB 220 units to test and quality assurance laboratories in the United Kingdom (UK). High current, low voltage power supplies find the...

ZPN Energy’s STREET HUBZ and SMART HUBZ rapid-chargers could help alleviate the problems of rapid-chargers not being installed at a sufficient pace to match the demand for new UK EVs (electric vehicles). 2021 - More EVs Registered than Public Charging Network Can Handle? In a recent news release calling for solutions to the problem, the Society of Motor Manufacturers and Traders (SMMT) stated, in 2021 – ‘Plug-in cars on the road grew by a phenomenal 280.3% between 2019 an...

Luminus Devices expands its human-centric lighting portfolio with the introduction of the Salud CCT tunable modules. The 5000K Salud technology has now been incorporated into Luminus' CCT tunable modules to provide lighting designers with high melanopic lux without using 6500K, thus avoiding light with too much blue tint.  5000K Salud channel The 5000K Salud channel has a melanopic ratio of 0.97 to keep people energized and alert during the day, while the 2200K channel has a melanopic ra...

GE Current, a Daintree Company, the industry-renowned advanced light and controls manufacturer, has announced its newest wireless lighting controls components, the WWD2 Series wall dimmers and scene switches. The new wall controllers come in either 2-button format for easy dimming, or 4-button scene switches for programmed light adjustment based on the tasks performed within the application space. WWD2 Series wall dimmers and scene switches These specification-grade switches are slim, have a...

RECOM offers fully custom, semi-custom, and modified-standard AC/DC and DC/DC converters from low power up to kilowatts. RECOM is known globally for its cost-effective AC/DC and DC/DC converters, with a wide range of standard products from 0.25W up to tens of kW. It may be less well-known that it also manufactures full-custom, semi-custom, and modified-standard products. semi-custom designs RECOM's engineering teams in China, Taiwan, Austria, and Italy have extensive experience in product dev...

Hitachi Energy has announced the launch of its new TRO600 series wireless routers with 5G capability, which are purpose-built to help industrial and utility customers achieve high reliability and resiliency in mission-critical operations. hybrid network With the integration of 5G technology, Hitachi Energy's TRO600 series routers enable a scalable, flexible and secure, hybrid wireless communication architecture. A hybrid network seamlessly combines the best of public and private cellular with...

Danfoss VLT condition-based monitoring allows users to employ their AC drive as a smart sensor. With condition-based monitoring, internal sensors monitor activity beyond the drive, gathering data from multiple sources to generate vital, real-time insights to better understand what is happening in the entire system, enable real-time early detection of issues and minimize unplanned and costly downtime. Software functionality This software functionality embeds monitoring functions in the drive T...

VACON® NXP DCGuard™ is a fast DC cutter device that detects and cuts off an outgoing short-circuit current. The semiconductor protection device isolates the faulty DC grid from the healthy DC grid before that fault affects the healthy DC grid. power distribution DCGuard™ enables fast disconnection and full selectivity between DC grids for all VACON® NXP series drives. Utilizing DC grids rather than AC grids enables power distribution with lower power losses. However, ensuri...

Power quality specialist REO UK has launched two new ranges of mains chokes, the N CNW 905 and N CNW 903 ranges, to tackle harmonic currents in industrial electrical networks. The ranges complement the mains chokes already available from REO, but have been designed to include fewer components and use less copper, reducing the energy requirements of electrical motors by more than 18 percent. innovative edge winding technique REO’s new N CNW 905 and N CNW 903 ranges are designed to use fe...

ZPN Energy has been providing Energy-as-a-Service (E-a-a-S) and microgrids with energy storage for at least three years now. They recently rebranded their E-a-a-S as ZAPME, and the first of their new, modular generation are in production, with first deliveries scheduled for the end of March 2022. ZAPME ZPN Energy has three versions planned: ZAPME GO - 11-22kWh Recovery units with rapid charge of 50kW ZAPME - 50kWh with 50kW of rapid charge ZAPME MAX - 150-300kWhKWH with rapid and ultra-r...

Under the title ‘Always in balance - Balancing supercapacitors’, Würth Elektronik provided a new help guide for developers on its homepage. The latest publication includes experience gained from support and addresses the relative unfamiliarity of using supercapacitors. This extends the support Würth Elektronik has previously provided in the form of application notes, explanatory videos and webinars. New help guide on supercapacitors Although supercapacitors, such as the...

RECOM announces a high-efficiency baseplate-cooled 500W DC/DC for rail applications. RMD500-EW series The latest addition to RECOM’s railway portfolio is the RMD500-EW series. Featuring a 500W rating with a wide 4:1 (43-154VDC) input range (170V peak) and 24V output, the product is suitable for nominal 72V and 110VDC inputs with tolerance and surges according to EN 50155. The RMD500-EW is designed for ‘plug and play’ use with all features required by EN 50155 including rever...

The article “The ABCs of Lithium-Ion Cell Manufacturing” provides an overview of the lithium-ion cell manufacturing process. In the article the author walked through 10 main steps of the manufacturing process, starting with preparing the materials that go into the cell’s construction and ending with final testing and grading. While these 10-steps are comprehensive, manufacturers are always looking at ways to enhance their process to better suit their specific needs. One way to...

LitePoint is the provider of test solutions for the world’s leading manufacturers of wireless modules and consumer electronics, including smartphones, tablets, and PCs. LitePoint products have been used to optimize and verify the operation of over 2 billion wireless devices.

Advanced packaging techniques have facilitated power conversion and power management solutions with the ability to take advantage of many state-of-the-art (SOTA) technologies and integrate them into highly dense, integrated components. Three-dimensional power packaging (3DPP) allows for the best of these technologies to contribute to size, weight, and power with cost (SWaP-C) optimization, while still taking advantage of the access to commercial, off-the-shelf (COTS) solutions. Getting the best...