Safety Switches and Disconnects News

Shanghai Electric Environmental Protection Group won the bid for the second phase of the water treatment project, part of Zhejiang Garden New Energy’s high-performance copper foil project. This is another zero-discharge water treatment project won by the Environmental Engineering Institute after the Novat Changsha plant’s procurement of zero-discharge equipment for thin film wastewater treatment, and the first project undertaken by the Environmental Protection Group in the copper fo...

The shipping industry is struggling with high seas: shipping companies are faced with the challenge of efficiently combining environmental protection and economic efficiency. To bring the two together, marine contractor - Van Oord has chosen to install efficiency PACKs, an organic Rankine cycle (ORC) from cleantech company Orcan Energy on two of its new hybrid water injection dredgers. The launch ceremony of the vessels took place in Rotterdam at the end of June. energy efficiency Among other...

DNV, the independent energy expert and assurance provider, will lead the process safety study to identify the main environmental, safety, and operational risks for the world's first offshore hydrogen production facilities. Lhyfe is a producer and supplier of green and renewable hydrogen for transport and industry, and Centrale Nantes is a French School of engineering and research center, that manages SEM-REV offshore test sites. green hydrogen-generating system The offshore electrolyzer...

In-Charge Energy, the pioneer in turnkey commercial fleet EV infrastructure solutions, has revealed In-Control, an end-to-end EV charger management platform developed exclusively for fleets. With In-Control, fleet managers can digitally operate, monitor, and maintain individual chargers, allowing them to optimize EV charging infrastructure for their electric vehicles. In-Charge clients, including Nissan, Ryder, Navistar, IC Bus, International Trucks, General Motors and Kaptyn, currently utilize...

In-Charge Energy, the pioneer in turnkey commercial EV infrastructure solutions, has purchased a new 21,414-square-foot facility in Richmond, Va., USA, which will serve as the company’s inventory warehouse and research and development hub.  “This new facility is a testament to our quick expansion and commitment to research-backed solutions for EV charging infrastructure,” said Cameron Funk, CEO of In-Charge Energy, adding “As a fast-growing leader in this space, we...

As the EU Commission prepares to present its ‘Fit for 55’ legislative package, the European CEO Alliance has issued policy recommendations supporting a progressive and ambitious push to achieve climate neutrality. Tackling climate change requires strong collaboration between the public sector and industry, the Alliance announced after its meeting in Paris. The Alliance would welcome a review of the EU’s major regulatory instruments, in particular subsidies for technologies wit...

The buck converter has been in use for a century and is an indispensable part of the current electronic circuits. This article describes how a crude electromechanical component has evolved into a miniature assembly that can process hundreds of watts of power. buck converter The buck converter converts an input voltage to a lower output voltage. Its basic elements are shown in Figure 1. Initially, the switch SW1 is closed; that is, current flows into the coil L1. Since the coil is a differ...

Energy storage will play a key role in the transition to a cleaner, greener energy system based on renewable energy. Consequently, the global market for energy storage is expected to grow 55-65% per year for the next five years. Hence energy storage systems must operate safely. However, while the individual battery cells that make up such systems are typically individually certified as safe, there are big challenges in integrating them into a safe overall system as evidenced by the number of la...

DNV’s report - 'Rising to the challenge of a hydrogen economy' draws on a survey of more than 1,100 senior energy professionals and in-depth interviews with industry executives, on emerging hydrogen value chains, from production to consumption. hydrogen economy It suggests that more than just ambitions, the hydrogen pledges, plans, and pilots of recent years have evolved into concrete commitments, investments, and full-scale projects. Some 84% of senior energy professionals believe that...

Gephart will once again be working alongside longtime partner RJM Construction for the renovation of the 1010 Strutwear Building in Minneapolis, Minnesota. Originally known as the Strutwear Knitting Company Building, this former hosiery factory which is listed in the National Register of Historic Places, will be repurposed into a new apartment building. In total, the 10-story, 261,457 SF building will have 172 apartments, office space, and retail space. The adjacent parking ramp and building co...

RECOM has launched an eighth-brick DC/DC converter series with 9-60 VDC input and optional 12, 24, or 48 V outputs rated at 150 W. The RPA150E series has an industry-standard pin-out with outputs trimmable over a wide ±20% range to include 28 V for avionic systems and 57 V for PoE applications. The 6:1 input range covers nominal 12, 24, and 48 V system rails with sufficient margin to include 48 V battery charging voltage and 12 V battery cranking voltage dips. High efficiency of the RPA...

Supporting E.ON’s digital ambitions, Sebastian Weber and Christopher d’Arcy will become Managing Directors of E.ON Digital Technology GmbH as of July 1, 2021 and will report directly to Victoria Ossadnik, E.ON SE Board Member for Digital. Sebastian Weber will act as group-wide CTO for E.ON, overseeing the expansion of digital platforms and IT operations. Christopher d’Arcy will be responsible as Senior Vice President for Digital & Technology Expert Services with accountabi...

DENSO, a mobility supplier announced it invested in Seurat Technologies, participating in the metal additive manufacturer’s Series B funding round. The investment will help speed the development and commercialization of Seurat’s patented additive manufacturing technology and is DENSO’s latest move to bolster its digital transformation. Area Printing™ technology Seurat’s Area Printing™ technology allows manufacturers to print metal parts at scale Seurat&rsq...

E.ON will continue its successful cooperation with RWTH Aachen University and has extended the existing cooperation agreement for another five years. A corresponding agreement was signed on 23 June by E.ON Board Member, Dr. Karsten Wildberger and the Rector of RWTH Aachen University, Professor Ulrich Rüdiger. Energy and sustainability research "With the new cooperation agreement, we will particularly promote research projects in the areas of energy and sustainability research, energy sys...

Aggreko is accelerating its investments in hydrogen technology. This step is part of its Net Zero program and will enhance the company’s capability to provide emission-free temporary power worldwide. At present, the pioneer in mobile and modular energy solutions is focusing on two different technologies. hydrogen combustion genset demonstrator Together with cleantech partner CMB.TECH, a 50 kVA hydrogen combustion genset demonstrator has been developed. After successful testing, Aggr...

On June 3, the Huzhou distributed power flow controller (DPFC) pilot project, developed and supplied by NR Electric, successfully withstood the manual short circuit test. The system responded accurately and the test results met the expectations. The success of this manual short-circuit test fully verified the ability of NR DPFC ability to withstand AC short-circuit current, AC fault ride through ability, and the accuracy of cooperation with AC line protection, marking that the 220 kV DPFC proje...

Every developer looks forward to the moment when he knows that his prototype is finally working, all key functions have been realized and the software is fully implemented except for the diagnostic functions. At the next meeting, he proudly announces that all that is needed at this stage is the EMC approval and a suitable power supply.  However, given the limited resources, designing a power supply in-house is not an option, as crucial deadlines would be missed. The team thus agrees to go...

In-Charge Energy, the pioneer in turnkey commercial fleet EV infrastructure solutions, has announced its latest hardware offerings for fleet EV charging. These innovative products address the unique reliability, durability, accessibility, and serviceability needs of fleet owners, managers, and drivers from nighttime visibility and safety to ruggedness for extreme weather conditions. User-friendly charging options A well-designed charging infrastructure can optimize an entire fleet, reducing t...

Axpo is further strengthening its position in the UK energy market. Its subsidiary, Axpo UK Ltd and French solar developer, Voltalia have signed a new ten-year, fixed price power purchase agreement (PPA), it was announced recently. Thereby, Axpo UK will purchase 100% of the electricity, Renewables Obligation Certificates (ROCs), and Renewable Energy Guarantees of Origin (REGOs) from Voltalia’s 7.2 MW Tonge solar park near Sittingbourne, in Kent, England. Axpo - Voltalia partnership Axpo...

Würth Elektronik and Unleash Future Boats unveiled the ‘ZeroOne’ prototype for an emission-free, autonomous watercraft at the GREENTECH FESTIVAL in Berlin. Würth Elektronik is a technology partner of the start-up and supports with modern electronics to make the revolutionary concept for emission-free water vehicles of the future a reality. With their start-up Unleash Future Boats GmbH, developers Stefanie and Lars Engelhard, who come from the automotive industry, are worki...

The Technology Progress Report, a new supplement to DNV’s annual Energy Transition Outlook, considers safety, efficiency, and competitiveness as well as the technical capability of these technologies, to deliver the deep decarbonization the world is striving for. decarbonized energy system Remi Eriksen, the Group President and CEO of DNV said, “The world needs to transition faster to a deeply decarbonized energy system, reducing emissions by around 8% each year to ensure an energy...

DNV, the independent energy expert and assurance provider, has acted as a technical consultant through the testing and verification of Brill Power’s new battery management system (BMS) technology. This testing confirms that Brill Power’s novel BMS concept brings advantages for a number of key battery characteristics like higher utilized pack capacity, that potentially results in lower lifetime cost. DNV tested Brill Power’s new battery management system technology in its Batt...

OverIT looks forward to hosting the next OverIT Partners’ Training! Sessions will start on June 22nd, and last until June 24th, 2021. During the Training, partners will get the chance to learn how to implement the FSM solution. If users are interested in participating, please check out the registration page and learn how to become an OverIT Partner. Why join the Partner Training? The role of AI and AR is poised to grow tremendously in the coming years as organiz...

At Electric Ireland, they understand these are difficult times for their customers. One of their most frequently asked questions from customers is how to know if their bill is accurate.  There are supports in place to help with understanding energy bills and ensuring they are accurate. Most of these involve submitting own meter reading, and Electric Ireland have made it simpler than ever to submit their read in a way that suits them best. Why is there a need to submit meter reading? If t...

RECOM has added a 4A option to its RPX series of miniature buck converters. The RPX-4.0 is rated to 3.8 to 36V input and programmable 1 to 7V output at 4A. With a compact 5mm x 5.5mm footprint and low 4.1mm height in a thermally-enhanced QFN package, the buck module pushes the limit on power density. The product features on-off control, a power good signal, and soft start, and is fully protected including under-voltage, short-circuit, over-current, and over-temperature. Integrated shielded in...

The 15th (2021) International Photovoltaic Power Generation and Smart Energy Conference & Exhibition (SNEC) was held in Shanghai, China, from June 3 to 5, 2021. For the first time, Shanghai Electric Power Generation Group, Shanghai Electric New Energy Co., Ltd. and Shanghai Electric Guoxuan New Energy Technology Co., Ltd. formed a group to participate in the exhibition. With the theme 'Build A New Industrial Ecology and Create New Energy Values', the group displayed products and services on...

Cuvée Systems® has announced its EZI-Set series of ultra-compact LED drivers (non-dimmable) that offer superior performance with four form factors. The constant current output is configurable via dip-switches to maximize application flexibility, ease of use, and simplified inventory management for manufacturers and installers. These drivers are ideal for small form factor directional lighting applications using COBs, including downlights, spotlights and track lights. Three different...

Volta Trucks, the full-electric commercial vehicle manufacturer, has announced that it will implement QAD’s Adaptive ERP and other QAD Adaptive Applications solutions, including QAD EQMS (Enterprise Quality Management System), QAD DynaSys DSCP (Digital Supply Chain Management), QAD Sourcing and QAD Supplier Management. Volta Trucks will implement QAD company wide. “We are at a pivotal moment of a major transformation in the automotive industry,” said Volta Trucks' Chief Execu...

On May 28, 2021, Shanghai Electric Digital Technology Co., Ltd. and Shanghai Kezhi Electric Automation Co., Ltd. (Kezhi Electric) held a signing ceremony at the headquarter of Shanghai Electric Group, indicating that Shanghai Electric Digital Technology became the controlling shareholder of Kezhi Electric. To boost digital transformation, Shanghai Electric orients at smart energy, intelligent manufacturing and smart cities and endeavors to build an ‘industrial ecology’ comprising sm...

Building work is currently underway on the ward to replace the old dormitory-style accommodation with single bedrooms. A range of other improvements are in progress including a new activity hub (featuring a gym, sensory room, therapy kitchen, and office); a waiting room and suite for patients’ mental health tribunal hearings; staff restroom; TV lounge, and a multi-faith room.  To enhance the team’s ability to provide safe and comfortable patient care, a simple lighting control...