Motors News

Luminus Devices, Inc. has released its fourth generation chip-on-board LED technology (Gen 4) that will open new opportunities in retail lighting as well as a wide range of indoor and outdoor lighting applications. Gen 4 COB technology It is possible for an LED to deliver the output and punch of a 70 Watt ceramic metal halide lamp Luminus Gen 4 COB technology combines significant improvements in efficacy, flux density, high maximum drive current, and high-temperature capability to enable brea...

The Zhuhai GuishanOffshore Project is the first green wind power demonstration project in China that uses jacket foundations, consisting of 27 units of My SE3.0-112 anti-typhoon wind turbines. The Project successfully withstood the test of Super Typhoon Mangkhut with an extreme speed of 70 m/s. The wind farm is located the Lingdingyang Bay in Zhuhai, and its straight-way distance to the Hong Kong-Zhuhai-Macao Bridge is only about 10 km. noise performance and environmental adaptability This mo...

On Nov., 4th, NR successfully delivered ±300MVar containerized Static Synchronous Compensator (STATCOM) system and series equipment in 500kV Wujiang substation, Suzhou City, China. As one of the world largest capacity STATCOM system, this project was equipped total capacity of ±300MVar STATCOM, which includes 3 sets of ±100MVar STATCOM. Moreover, the max output capacity can reach to ±450MVar in failure state. Advanced multi-terminal VSC-HVDC solution NR offers fiel...

Thomas More University (TMU), located in Belgium, entered a team of 10 engineering students into the 2018 Shell Eco Marathon. The annual design challenge pits university engineering teams from around the world to design and build highly efficient vehicles. The team competed in the Urban Concept class where the design had to incorporate practical road-legal functionality, including windshield wipers, lights, and a horn, along with energy efficiency. High-quality clutch Warner quickly decided t...

Connecting the center and east Tibet power network in China, the Mangkang substation has successfully operated from 11th August 2018, as an essential milestone of the first 500kV substation in Tibet power grid. The Mangkang substation is 4,295 meters above sea level and is the highest altitude 500kV substation in the world. NR provides all-around solutions for the substation, including SCADA system, protection & control, measurement devices, stability control devices, switching controller,...

Increasing consumer demand for frozen food items continues to generate significant growth in cold storage capacity around the world. Harsh environmental conditions in these facilities are challenging for both workers and equipment, including forklifts. Besides exposure to extremely cold temperatures, forklifts are also subjected to damaging condensation that occurs as the trucks move in and out of refrigerated areas. special feature packages Since cold storage facilities are costly to operate...

Advanced plant maintenance, packaged integrations, BI & Analytics, and open-source GIS, are the strong points of the new release.  As the concept of workforce digitalization continues to grow and influences a greater number of businesses, FSM is shifting its proposition toward an even more connected world of possibilities, both for field and plant maintenance. The new release of Geocall will drive the clients into a comprehensive Field Service transformation, through a broad and deep a...

Construction is currently underway at four recently awarded casino projects for a Gaming & Hospitality group. Gephart will be renovating three sportsbooks throughout NW Mississippi at Goldstrike, Sams Town and Harlows casinos. The fourth project will convert portions of the gaming floor into a poker room at the Four Winds South Bend casino, a new construction project that Gephart completed earlier in the year.

The Gephart-Morse joint venture, a design-assist electrical contractor for the Raiders Stadium project in Las Vegas, was recently awarded the Low Voltage Package by the Mortenson-McCarthy joint venture. Work will include Structured Cabling, A/V and Sound, IPTV, Broadcast, CCTV Surveillance, and Access Control Systems. This project further solidifies Gephart Low Voltage System’s footprint in the technology market building on the successful completion of other sports facility projects inclu...

Industrial brakes and clutches could become a $1.7 billion market by 2024, mostly due to investment in industrial automation and the rise of smart factories. That’s according to Global Industry Analysts Inc. (GIA). The quickest-growing industries include those related to material handling, food and beverage, machine tools, and textiles. As with other technologies, the fastest rate of adoption is in the Asia-Pacific region with a CAGR of 8.4% for the clutch and brake market over the next s...

One of the main challenges in tape manufacturing is the round-the-clock regulation of web tension according to tape width and roll diameter. By applying an automated solution that continuously adapts to changing conditions, an aluminum tape manufacturer was able to upgrade its tension control system, increasing productivity and product quality. tension control Unwinding operations are indispensable in tape manufacturing. However, these can be extremely sensitive processes that can affect the...

Recently, the first unit of Zungeru hydropower station in Nigeria was successfully commissioned and realized power generation, which laid a good foundation for the power generation of subsequent units. NR has designed hydropower unit protection solutions for the project and provided key equipment such as generator transformer unit protection and switchyard protection. Zungeru hydropower station is located in the middle and upper reaches of the Kaduna River near Zungeru Town, Niger, Nigeria. Wit...

On June 9th, 2018, a 500kV digital substation for the Bailing transmission and transformation project was successfully put into operation in Liangshan district, Sichuan, China. The Liangshan substation was the first 500kV digital substation commissioned by NR in the Liangshan district. all-around integrated solutions NR provided all-around integrated solutions for this substation, including network switches NR provided all-around integrated solutions for this substation, including intelligen...

NR is proud to announce the commissioning of India’s first 1 MW microgrid at the Central Electronics Limited (CEL) facility in Sahibadad, Uttar Pradesh, India. In over 10 years NR has deployed protection & control solutions around and pioneered the development of microgrid solutions. With the booming renewable energy integrated into India's power grid, it is a challenge to keep the stability of the power grid, due to renewable energy is not as stable as the traditional power supply. T...

On June 2nd, 2018, NR successfully commissioned two sets of 20 Mvar/13.8 kV Mobile Static Synchronous Compensator (STATCOM) in Layla and Summan Area, which is the world’s first energized fully mobile STATCOM. Due to the large amount of induction-motor-based air conditioner load the power grid of Saudi Arabia suffers from severe voltage stability and FIDVR issues (fault-induced delayed voltage recovery). STATCOM is the most advanced technology to mitigate voltage stability problems. STATC...

Gephart Electric is proud to support the University of Memphis Herff College of Engineering by joining other industry partners to establish a new faculty position within the Civil Engineering Department, building the Construction Management Concentration. As a founder of this program, Gephart will offer guidance in determining the curriculum, as well as insight into hiring the faculty member to lead the program.

On May 25, 2018, Canada's 735 kV Chibougamau series compensation upgrade project undertaken by NR completed all field & commissioning tests without delay and successfully put into operation. Fundamentally, series compensators were installed in the 1990s in the Chibougamau Substation close to the James Bay Area by another supplier, its control and protection system has reached the end of its life span and the replacement of outdated spare parts is highly required. NR series compensators pro...

C&S Electric celebrated its 52nd Founder’s Day in honor of the company’s inception. The Founder Day has always been of great significance to C&S Group. annual event The annual event had festivities, such as presentations, speeches, full recreational activities, and awards On this occasion, the whole C&S family gathered for a day-long celebration with full zeal to commemorate the company’s founder for establishing his dream. The special day was held at Greater No...

Gephart Electric, MN continues to grow its Service Division with the addition of Jim Herlofsky as Senior Project Manager and Eric Dalgaard as Project Manager. Jim brings a wealth of knowledge and experience to the company with nearly 30 years in the electrical industry, including beginning in the field before taking on project management roles. Eric is a 37-year Gephart veteran bringing a wealth of estimating and project management experience and is known for his attention to detail. electrica...

C&S Electric has successfully participated in Hannover Messe 2018, held in Germany from 23rd April – 27th April 2018. The company exhibited its latest Switchgear, Controlgear, Protection Devices, Metal Clad & Cast Resin Power Busbars Products. Hannover Messe Hannover Messe is one of the world’s major Trade Fairs for industrial Technology where technologies and core areas of the industry from research and development, industrial automation, IT, industrial supply, production...

If headed to Target Field, be sure to check out the stadium’s newest feature, Bat & Barrel. Gephart was proud to team up with Mortenson to transform the former Metropolitan Club into a modern sports bar with local food and beverage options. Open to all ticket holders, Bat & Barrel features an in-field-shaped bar, large TV screens, seating for roughly 300 fans, and a drink rail down the right field line for fans to watch the game.

Thanks to its functionalities and innovative approach, OverIT’s product is now an international benchmark in Field Service Management for several consulting companies. There is growing positive feedback on our product, both from the market and those customers who implemented it, and several multinational IT consulting companies have cited Geocall in their publications as one of the best Field Service Management products worldwide. Array of service requirements The innovation-driven appr...

Altra Industrial Motion is a major provider of advanced power transmission solutions for outdoor power equipment applications with industry-renowned brands, such as Guardian, Kilian, TB Wood’s, Warner Electric, and Warner Linear that provide OEMs with expectational drivetrain value by ensuring component compatibility and optimized performance. Whether a modified standard product or a customer solution is required, Altra provides extensive technical experience in outdoor power equipment an...

Gephart Electric Project Manager - Phil Zignego was elected 'Electrical Component Team Pioneer' by the IPD Team at the Lakeland Medical Center in St. Joseph, MI. Gephart is proud to partner with Turner Construction on yet another major healthcare project; and to support the local partner, IBID County Electric, in their many years of outstanding service at this Lakeland facility.

SPACE1 Maintenance and SPACE1 Virtual Collaboration customers can now rely on the innovative technology offered by the RealWear HMT-1™ device and perform maintenance activities on the field or within production plants completely hands-free, interacting with procedures and remote support through voice control, only. RealWear’s HMT-1 is designed for those technicians, engineers, and field operators in charge of equipment inspection and maintenance ac...

With many industries embracing the latest technology trends found in the Internet of Things (IoT) and Industry 4.0, it can be easy to overlook some of the simpler and more cost-effective solutions. For packaging and labeling, maintaining precision and product positioning is extremely important for high-quality results and does not necessarily require the latest in servomotor design. cost-effective solution The inevitable march of progress brings with it many innovations and solutions that sav...

OverIT and Almawave announce the signing of a partnership agreement that covers the integration of voice controls and predictive analysis in the management of maintenance interventions, thus providing smart support that allows to find simply and quickly the information needed, to promptly report surveys and interventions, and to simplify the working procedures. This all can be achieved thanks to the power of automatic transcription voice controls and of the Artificial Intelligence for fast...