Ethiopia Electrical Industry News

ADI Global Distribution, a wholesale distributor of security, AV, and low-voltage products, announced the opening of a new branch location in Austin, Texas for its recently acquired Electronic Custom Distributors (ECD) business. The expanded footprint provides customers with more services, support, and immediate availability to a fully stocked assortment of AV and Smart home products. New branch location and features The new ECD branch, located at 3006 Longhorn Blvd., Ste. 107, Austin, TX 787...

In the winter, every kilowatt hour counts to reduce electricity and gas consumption. E.ON will therefore reduce the energy consumption of its own buildings by at least 20 percent on average. Across all locations in Germany, E.ON will operate all non-essential light sources such as logos and outdoor lighting on a limited basis or switch them off completely. The room temperature will be reduced to 19 degrees and hot water will be switched off wherever possible. 25% energy savings A particularly...

Schneider Electric, a pioneer in the digital transformation of energy management and automation, will present four expert sessions at 2022 PACK EXPO, October 23-26 in Chicago. These sessions will take a deep dive into developing operational sustainability, including the company’s path towards net-zero carbon emissions, building sustainable factories, and navigating cybersecurity in an increasingly connected world. These thought leadership sessions are critically timed to the current state...

On recultivated land at the Garzweiler open-cast mine, well-established partners, the city of Bedburg and RWE, successfully connect another wind farm with a capacity of 28.5 megawatts (MW) to the grid. The five wind turbines of the 30 million Euro - 'Bedburg A 44n' project has the capacity to generate enough green electricity to meet the annual needs of 28,000 households - more than the city's citizens and businesses consume.   The turbines complement the existing Königshovener H&oum...

Every engineer sets out to design for maximum performance of their system, power supply, or any other product they are working on. But what does designing for performance mean? In terms of power solutions, this may refer to the typical tradeoff of size, weight, and power (SWaP) factors, perhaps even including cost (SWaP-C) factors. Designing for energy performance (typically measured in terms of efficiency metrics) implies a focus on optimizing the performance of power supply energy consumption...

Small and medium-sized businesses are highly exposed to high energy prices, and the International Energy Agency and the European Commission held a high-level event to raise awareness of what governments, businesses, and related stakeholders can do to empower and protect these backbones of the European economy. At the online event, which was led by IEA Executive Director Fatih Birol and European Commissioner for Energy Kadri Simson, the Commission presented support measures that are already avai...

Mitsubishi Electric has launched a helpful new guide designed to help building owners and managers reduce the risk of their buildings becoming stranded assets due to not reaching the government’s environmental standards.   The new white paper, ‘Stranded assets: A roadmap to net zero for new and existing buildings' is designed to provide building owners and managers with more insight on the importance of setting up their buildings for net zero and describes method...

Mitsubishi Electric Corporation (Mitsubishi Electric) announced that it has joined the Japan Center for Engagement and Remedy on Business and Human Rights (JaCER) as a Founding Member (Regular Member). JaCER was established in June 2022, in order to support and promote the redress of grievances by companies. JaCER provides a non-judicial ‘Engagement and Remedy Platform’ for grievance redress, based on the United Nations’ Guiding Principles on Business and Human Rights. JaCER&...

Würth Elektronik ICS, inventor of Powerelements for PCB contacting, presents a new generation of its proven, lead-free high-current contacts: the second PowerPlus generation, LF PowerPlus 2.0, has the same properties in terms of torque and current-carrying capacity as the previous version, but it is now even simpler and more efficient in terms of processing and assembly. With the LF PowerPlus product family, Würth Elektronik ICS offers robust and efficient high-current contacts for PC...

Cuvée Systemsâ in partnership with Luminus, has announced its newest addition to the EZI-Set family of compact drivers – the DITR round in-track driver. EZI-Set DITR series The EZI-Set DITR series provides a unique, round form factor in-track driver suited for track-mounted pendants, downlights, and area lights as well as conventional track lights. In contrast to a long, in-track driver, the compact 57mm diameter form factor complements the design of round light fixtures ma...

High Power Charging (HPC) stations have a charging power of at least 100 kW. Existing grid infrastructure, however, often provides significantly less capacity and upgrades are extremely costly. Luckily, most cars only charge with maximum power for a brief period. Batteries leverage this and enable the use of HPC on existing infrastructure. Cars briefly charge with full power As any EV driver will tell the user, they can charge to some 60-80% in around half an hour, but getting to 1...

Application notes from Würth Elektronik provide users with accurate information and practical tips. Not only for developers, the latest release ANP101: RF Gain Block Amplifier with Integrated Multilayer Ferrite Bead for Broadband Operation addresses how the transmission characteristics of an RF amplifier can be enhanced and improved by the right choice of components and an optimal layout. RF performance From 5G systems to radio and antenna applications, wireless communication accomp...

Schneider Electric, the globally renowned company in digital transformation of energy management and automation, has released new updates to its EcoStruxure™ domain architecture and platform, EcoStruxure Power. The comprehensive IoT-enabled architecture and platform is designed to digitalize and simplify electrical distribution & power management, delivering reliable ‘always-on’ power for commercial buildings, healthcare, data centers, industry, and infrastructure. Integr...

Despite concerns about the effects of the current energy crisis, global carbon dioxide (CO2) emissions from fossil fuel combustion are expected to grow by just under 1% this year, only a small fraction of their increase last year, as a strong expansion of renewables and electric vehicles prevents a much sharper rise. New IEA analysis of the latest data from around the world shows that these CO2 emissions are on course to increase by close to 300 million tonnes in 2022 to 33.8 billion tonnes &nd...

Cummins China and EDF Renewables signed a distributed photovoltaic Power Purchase Agreement in Beijing, aiming to cut down electricity consumption from traditional grids and reduce carbon emissions in Cummins facilities & operations. Cummins will provide the roof & ground space and will consume the generated solar power, EDF Renewables will be responsible for the investment, installation, and operation of solar PV generation equipment. WANG Ning, Vice President of Cummins, and Erwann De...

NTT Communications Corporation (NTT Com), the ICT solutions and international communications business within the NTT Group, and DENSO CORPORATION (DENSO), the global manufacturer of mobility components offering advanced mobility technologies, systems, and products, announced that it will collaboratively develop the Security Operation Center for Vehicles (VSOC) to respond to the threat of increasingly sophisticated cyber-attacks against vehicles. Culminating from past efforts, this collaboration...

Schneider Electric, the pioneer in the digital transformation of energy management and automation, has appointed Manish Kumar as the new Executive Vice President of Digital Energy, effective October 1, 2022. The Digital Energy business provides energy and automation solutions to deliver a sustainable and efficient future for customers. Power digitalization is foundational to future-ready energy management. It makes the invisible visible, turning data into business value to enable better decisi...

WeVee and Enel X Way Germany, the German division of Enel Group's new company dedicated to electric mobility, reached an agreement through which the award-winning JuiceBox charging stations will be available at preferential rates to all WeVee corporate clients. This is the first step of the cooperation between WeVee and Enel X Way, empowering the companies' joint missions of accelerating the switch to clean mobility and sustainable commuting, and trying to extend such agreements to other countr...

Schneider Electric., the pioneer in the digital transformation of energy management and automation, has unveiled a complete preview of its latest sustainable, digital, AirSeT medium-voltage (MV) switchgear ranges, at the Innovation Summit World Tour, Schneider Electric’s annual customer and partner event.   Schneider continues to develop and expand AirSeT ranges in line with its commitment to build a full SF6-free MV portfolio, and to meet requirements of different geograp...

Schneider Electric., the global pioneer in the digital transformation of energy management and automation, announced at the NECA 2022 Convention & Trade Show a wide portfolio of product innovations that will enable electrical contractors and installers to protect themselves from safety risks, while also improving efficiency and reliability. “Schneider Electric is leading the digital transformation of electrical distribution and energy management,” said Michael Lotfy, SVP P...

Canyon State Electric (CSE) received national recognition from Independent Electrical Contractors (IEC) for excellence in safety. From a group of 3,600 member businesses nationwide, CSE was among one dozen companies with the distinction of Superior Achievement in Safety.  The award, which was announced during IEC’s annual SPARK conference, scores a safety department in over twenty categories, including upper management/owner commitment, employee participation, use of personal protect...

ZPN Energy is proud to announce that they are the main sponsor of local Coventry Under 14 (U14) football team - Chapelfield Colts. The team is managed by ZPN Energy’s Head of Finance, Anthony Colley. Chapelfield Colts’ first league game of the season was a tough test against a team, which has recently stepped down from a higher league. Chaps came out of the blocks sharpish and created a host of chances early on. ZPN Energy - main sponsor of Chapelfield Colts The breakthrough came...

RECOM Technologies, a renewable energy company, and the only European Bloomberg Tier 1 PV module manufacturer launches the new LION 390Wp Bifacial HJT Mono Crystalline Double Glass Module. Allowing more energy to be harvested, due to the Heterojunction technology (HJT), the LION 390Wp promises great performance in small and large-scale ground or rooftop solar applications. Lion series modules with a power output of over 700Wp are based on Heterojunction (HJT) technology. A heterojunction (HJT)...

Emtelle, the pioneering global technology company, has appointed Tommy Conner as Managing Director USA to lead its new North American operation. He joins Emtelle, one of the manufacturers of blown fiber cable and ducted network solutions, as preparations remain on track to open its new 300,000 sq ft facility in Fletcher, North Carolina. Conner is a hugely experienced executive with more than 30 years’ experience in industrial distribution, engineering, and manufacturing involving products...

Floriade Expo 2022 Amsterdam-Almere has closed its gates, after a lively final weekend marked by concerts, cultural shows and thematic events. Dozens of countries participated in the Horticultural Expo, which for six months showcased ideas solutions and innovations relating to the theme “Growing Green Cities”. Floriade Expo 2022 – the seventh Horticultural Expo to be hosted by the Netherlands – took place on a 60-hectare site situated on the south side of the Weerwater i...

Mitsubishi Electric Corporation (TOKYO: 6503) announced that certain provisions of an ISO9001 certification of the company’s Nagasaki Works (Togitsu-Cho, Nishisonogi-Gun, Nagasaki Prefecture), which had been withdrawn on September 16, 2021, was re-certified effective October 10, 2022, following a reassessment by LRQA Limited. Notification from the LRQA Limited was received on October 13, 2022.

With the start of cable production at Prysmian Group, SuedLink, the largest infrastructure project of the energy transition in Germany with a length of around 700 kilometers and 4 GW of transmission capacity, has reached another milestone. Prysmian started the production of a ±525 kV HVDC underground cable system at its French plant in Montereau, which allows a transmittable power of 2 gigawatts on a single system. SuedLink, energy transition infrastructure project The two transmission...

Canyon State Electric (CSE) was named one of Arizona’s Most Admired Companies in September by AZ Big Media and BestCompanies AZ. Fifty recognized businesses across all industries were invited to an awards ceremony last night in north Phoenix to celebrate their achievements. The award measures companies across six key areas: customer opinion; diversity, equity, and inclusion; innovation; leadership excellence; social responsibility; and workplace culture. “Arizona’s Most A...

RWE is further progressing with the deployment of its Thor offshore wind farm by selecting two preferred suppliers for the electrical transmission system and entered into early works agreements with them. Siemens Energy becomes the preferred supplier for the design, construction and installation of the onshore high voltage substation. The work will be carried out by the company's Offshore Center of Competence, located in Ballerup, Denmark. HSM Offshore Energy is selected as preferred supplie...

Cummins Turbo Technologies, a business unit of global power technology Cummins Inc. celebrated the expansion of its new turbo remanufacturing operations in North Charleston, allowing the company to better serve customers. Remanufacturing is an important part of Cummins’ environmental sustainability strategy, Destination Zero. Remanufacturing will allow the company to use less, use better and use again, while presenting an environmentally friendly option to replace a turbo. Additionally,...