Luminus News

NewEnergy and Luminus have recently introduced to the industry new linear dim-to-warm modules that simplify system design and ensure color and tone consistency between linear and spot luminaires. Each module has an onboard IC that enables dynamic CCT control from a single-channel LED driver and a standard dimmer switch.  Zhaga footprints The initial linear modules have industry-standard Zhaga footprints Using the same LEDs and IC as the Luminus CDM modules, which are commonly used in sp...

Luminus Devices announces the immediate availability of its newest UVC LED, the XBT-3535, with performance ranging from 50 mW to 80 mW in the 275-285 nm range. UVC LEDs With the global need for disinfection and sterilization devices increasing, the price-performance combination of the XBT-3535 will allow companies to quickly bring novel and affordable solutions to market.  The germicidal effectiveness of UVC LEDs against E-coli, MRSA, and a variety of pathogens has been well documented....

Luminus Devices expands its illumination portfolio with the introduction of the Salud line of 3030 mid-power LEDs. Salud LEDs are the first with datasheet-specified melanopic ratios (MRs) in addition to CRI, R9, CCT, and Flux. By enhancing the spectrum with cyan for melatonin suppression and enriching the 660 nm emission for natural skin tones and excellent red-rendering, Luminus Salud LEDs can deliver warmer, more comfortable light that keeps people healthy, alert, and productive.  Stan...

Luminus Devices is expanding its Gen4 LED COB portfolio with two new Pico-COBs with high-output and very small light-emitting surfaces (LES) that enable spotlights with compact form factors, narrow beam angles, and high center beam candle power. Small, 6mm LES COBs are typically limited to approximately 9-degree viewing angles. Luminus’ new Pico-COBs enable fixtures with viewing angles as narrow as 3 to 5 degrees and produce high flux density, or punch, that is so important for high qual...

Luminus Devices has significantly expanded its portfolio of high-power infrared (IR) LEDs with eleven emitters designed to address the rapid expansion of automotive, consumer, machine vision, medical, and security applications. The Luminus IR SST LEDs are now offered in three wavelengths – 810 nm, 850 nm, and 940 nm – and six beam angle options ranging from 40° to 130°. The high radiometric power output and low thermal resistance allow system designers to reduce the number...

Luminus Devices, Inc. has released its fourth generation chip-on-board LED technology (Gen 4) that will open new opportunities in retail lighting as well as a wide range of indoor and outdoor lighting applications. Gen 4 COB technology It is possible for an LED to deliver the output and punch of a 70 Watt ceramic metal halide lamp Luminus Gen 4 COB technology combines significant improvements in efficacy, flux density, high maximum drive current, and high-temperature capability to enable brea...

Luminus Devices, Inc., a global manufacturer of high-performance LEDs and solid-state light sources, has released its Horticulture COBs with spectrums targeted for cannabis production. The new devices are available with 14mm and 22mm light emitting surfaces (LES) and provide best-in-class PPF and PPF/W performance. With operating power from 25W to 125W, the PPF range extends from 45µmol/s to over 150µmol/s with the larger 22mm LES. high PPF output "Horticulture COBs are perfectly...

Luminus Devices, Inc. has released its third proprietary spectral technology, PerfectWhite™, which closely replicates the visual characteristics of halogen lamps (3000K). When compared to halogen, PerfectWhite was preferred by lighting designers in testing at both Light + Building and Lightfair. PerfectWhite PerfectWhite delivers without infra-red, green/yellow tint, and ultraviolet radiation Though the spectrums are a virtual match – Luminus filled the cyan gap – PerfectWh...

Luminus Devices, Inc. has expanded its ultraviolet (UV) LED portfolio with two new 280 nm devices intended for the medical health and well-being product segments. The standard footprint 3535 surface mount emitter is a 350 mA device with a peak output up to 60 mW. The second ultra-compact emitter is 1.3 mm by 1.3 mm and only 0.85 mm tall; it delivers 3 mW at 20 mA and a peak output of 11 mW at 100 mA.  1313 UV-C LED "Air, surface, and water disinfection markets will see a significant numb...

Luminus Devices, Inc., a global manufacturer of high-performance LEDs and solid-state light sources, has expanded its horticulture LED portfolio with new SST-20 series white LEDs to complement the extensive range of discrete wavelengths from UVA (365nm) to Far Red (730nm). white light in horticulture fixture Incorporating white light in horticulture fixtures provides illumination in the greenhouse and makes it easier to observe crops for signs of disease, in many cases, white LEDs can replace...

Luminus Devices, Inc., has released its breakthrough warm dimming and dynamic tuning modules that deliver exceptionally uniform color and control across any environment and enable consistency from fixture to fixture and between linear, down, and directional luminaires that are used in the same space. Unique to the new modules are onboard IC chips that allow exceptional color quality and uniformity in hospitality, commercial, and office environments. cost-effective solution "The deep golden gl...